Products for 'coating test master'

Coating Thickness Meter PCE-CT 25FN-ICA incl. ISO Calibration Certificate

£ 272.00

Price excl. VAT &. delivery

The coating thickness meter is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this coating thickness meter does not have to differentiate between ferrous and non-ferrous metal.

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)

Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm
incl. ISO Calibration Certificate

Coating Thickness Meter PCE-CT 25FN

£ 130.00

Price excl. VAT &. delivery

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)
Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm

Thickness Meter PCE-FD 20

£ 4,093.00

Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

Operating frequency range: 1 … 10 MHz
Measured time interval range: 6 … 1000 microseconds (µs)
Sound velocity: 1000 … 9999 m/s

Thickness Meter PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Thickness Meter PCE-UFD 50

£ 2,448.00

Price excl. VAT &. delivery

The thickness meter is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the thickness meter considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Meter LM-TC-DUAL

£ 793.00

Price excl. VAT &. delivery

The Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Thickness Meter LM-MCDX-52DP

£ 1,184.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism, swiveling

Thickness Meter LM-MCDX-1F

£ 1,184.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method allows using the Thickness Meter measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 1000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Spring-loaded measuring probe for small parts and complex surfaces

Thickness Meter LM-MCDX-52D

£ 1,131.00

Price excl. VAT &. delivery

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Thickness Meter LM-MCDX-1FT

£ 1,157.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 1000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Rod-shaped transversal probe for small indoor spaces

Thickness Meter LM-MCDX-6FT

£ 1,157.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 6000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Rod-shaped transversal probe for interiors and pipes

Thickness Meter LM-MCDX-7F

£ 1,131.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Thickness Meter PCE-CT 100N

£ 1,447.00

Price excl. VAT &. delivery

The thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 920.00

Price excl. VAT &. delivery

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Thickness Meter PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate

£ 914.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Thickness Meter LM-MCDX-5FP

£ 1,095.00

Price excl. VAT &. delivery

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism, swiveling

Thickness Meter PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate

£ 899.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Thickness Meter PCE-CT 80-FN3

£ 791.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

£ 926.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Thickness Meter LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Thickness Meter LM-TC-FERRO

£ 704.00

Price excl. VAT &. delivery

The Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, enabling precise coating thickness measurements at any time. Thanks to its compact design and low weight, the Thickness Meter is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

For FE metals
Wireless interface for Windows, iOS and Android
OLED display
IP54 housing

Thickness Meter PCE-CT 80-FN2

£ 773.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

£ 1,282.00

Price excl. VAT &. delivery

The PCE-TG 300-P5EE is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-CT 80-F5N3

£ 800.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-FN2D5

£ 784.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-FN1D5

£ 764.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

£ 745.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Thickness Meter PCE-TG 300-P5EE

£ 1,189.00

Price excl. VAT &. delivery

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth

Thickness Meter PCE-TG 300-HT5

£ 1,113.00

Price excl. VAT &. delivery

The PCE-TG 300-HT5 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 12mm / 0.47"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 5MHz
Bluetooth

Thickness Meter PCE-TG 300-HT5-ICA incl. ISO calibration certificate

£ 1,215.00

Price excl. VAT &. delivery

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 12mm / 0.47"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate

£ 1,100.00

Price excl. VAT &. delivery

The PCE-TG 300-NO2 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
Diameter: 14 mm / 0.55"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 2.5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO7-ICA incl. ISO calibration certificate

£ 1,091.00

Price excl. VAT &. delivery

The PCE-TG 300-NO7 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 0.65 … 200 mm / 0.025 … 7.87" (steel)
Diameter: 6 mm / 0.23"
Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
Frequency: 7 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO5-ICA incl. ISO calibration certificate

£ 1,064.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-CT 80-FN0D5

£ 616.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"