Here you will find different temperature sensors for multiple applications. Temperature sensors are mainly used to measure both air temperature and surface temperature in liquids and solids. Our range of temperature sensors is as broad as the different applications they can be used for. In addition to resistance sensors (Pt100) you will also find type K thermo-elements (NiCr-Ni). The WTR series temperature sensors offer a solution to many different problems. We offer standard temperature sensors for the industrial sector and for gastronomy. They are distinguished by a stainless steel connection and by the possibility of creating an aseptic measured point.
The WTR-400 temperature sensors have a compact design. The connection is performed through M12 plug. A transducer, which offers 4-20 mA output signal, can be optionally added at the bottom of the case. Clamping screws and welded sleeves can be ordered separately. The WTR-270 series is a special version of temperature sensors. These temperature sensors are designed as driving-in sensors, not as a fixed installation ones.
The resistance temperature sensor WTR 150 is designed for applications in the food industry. Thanks to the 1/2" thread, the WTR 150 resistance temperature sensor can be screwed to a tube or vessel by means of a sleeve. Due to the rounded tip, it is not a problem if the resistance temperature sensor comes in contact with food. The proble length is in steps of 50 mm up to 400 mm and can be freely selected.
- Measuring range: - 50 °C ... 400 °C - Accuracy: Class A - Tapped holes for sockets with 1/2"
The WTR 190 ambient temperature sensor can be mounted on the wall. The WTR 190 ambient temperature sensor has a polyamide case. The protective case of the Pt100 sensor is made of stainless steel. The measuring range extends from -50 °C to 130 °C.
- Sensor length: 45 mm - Wall-mounted - Class A Pt100
The WTR 270 temperature sensor for food industry is distinguished by its robust design (stainless steel or PTFE ). The WTR 270 temperature sensor for food industry is available in different lengths, so the device will be a great help for health inspectors.
- Different sensor lengths - Stainless steel or PTFE versions - Pt100 Class A
The Pt100 WTR 280 sensor cable has a simple design. The Pt100 WTR 280 sensor cable has a class A Pt100 sensor, a protective case as well as a connection. The Pt100 WTR 280 is available in 2 -, 3 - or 4-wire connected to the supply line.
- Different sensor lengths - Measuring range of -50 °C ... 200 °C - 4 mm, 5 mm, 6 mm and 9 mm in diameter
The temperature sensor PCE-P18 is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the humidity sensor PCE-P18. Air humidity and temperature are accurately determined in this compact humidity sensor via a semiconductor component. For commissioning, the PCE-P18 humidity probe is supplied with a DC voltage. The measured values are output via a two-wire cable.
- With display - Standard signal output - Simple wall mounting - RS-485 interface