Industrial Measurement Products and Solutions

Display System

Order no.: PCE-N43

PCE-N43 is a power display panel for system integration. PCE-N43 measures 3-phase network parameters including current, voltage and power. Current can be measured directly up to 63 A. PCE-N43 is ideal for compliance with the Energy Management Regulation ISO 50001


- Measurement of 3-phase network parameters
- Current can be measured directly up to 63 A
- DIN rail mounting

 

 

Manufacturer: PCE Instruments
£ 200.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N24H

The digital panel meter PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable on the digital panel meter PCE-N24H.


- IP 65 in the front
- 100 V, 250 V, 400 V, 5 A DC (arbitrary)
- Configuration via software  

 

Manufacturer: PCE Instruments
£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N24S

The PCE-N24S digital indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S digital indicator has a 5-digit LED display to allow the user to read the directly measured current values.


- IP 65 in the front
- For 4-20 mA signals
- Connection by means of a screw terminal

 

Manufacturer: PCE Instruments
£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N24Z

The digital indicator panel display PCE N24Z is used to represent AC parameters. The panel display can measure and display alternating current, AC voltage or frequency. The ability to scale the input signal is free, allowing a very wide range of applications.


- IP 65 in the front
- Measuring speed: > 0.5 sec.
- 4-digit LED screen (20 mm height)

 

Manufacturer: PCE Instruments
£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N25H

The digital indicator PCE-N25H is used for measuring and displaying direct current and direct voltage. Depending on your specific needs, the digital indicator can be ordered with different inputs, such as ±100 V DC, ±250 V DC, ±400 V DC, ±1 A, ±5 A, 0...100 V DC or 0...250 V DC. The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- 7 different input options
- Accuracy: ± (0.2 % FS + 1 digit)
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N25Z

The digital indicator PCE-N25Z can be used for processing different AC input signals. Depending on your specific needs, the digital indicator can be ordered with different inputs, like 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC and 20...50 Hz. The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected on the front
- 6 different inputs available
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N25T

The digital indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N20U

The PCE-N20U digital universal indicator is used for processing 0...10 V signals. A lot of measuring transducers and sensors use this type of output, which makes the PCE-N20U suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20U.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 dgt.)
- 5-digit, three-colored LED display
- Two open collector outputs

 

Manufacturer: PCE Instruments
£ 68.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N20I

The PCE-N20I digital indicator is used for processing 4...20 mA and 0...20 mA signals. A lot of measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.


- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

 

Manufacturer: PCE Instruments
£ 68.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N20T

The PCE-N20T digital indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the PCE-N20T. Depending on the actual values, the Temperature can be shown in three different colors, which makes it easier to evaluate them.


- Input (selectable): Pt100, thermocouple type J or type K
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- For Pt100 sensors or thermocouples

 

Manufacturer: PCE Instruments
£ 68.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N30U

The universal digital indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the digital universal indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.


- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

 

Manufacturer: PCE Instruments
£ 84.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N20Z

The PCE-N20Z digital indicator can be used for measuring AC voltages up to 400 V and AC currents up to 5 A. The current or voltage to be measured can be connected directly to the digital indicator PCE-N20Z. The measurement results are shown on the large 5-digit LED-display of the PCE-N20Z.


- Input (selectable): 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC, 20...500 Hz
- Accuracy: ± (0.5 % FS + 1 dgt.)
- Two open collector outputs
- 5-digit, three-colored LED display

 

Manufacturer: PCE Instruments
£ 88.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N30H

The digital indicator PCE-N30H can measure direct voltage up to 500 V and direct current up to 5 A. This makes the digital indicator an ideal device, when it comes to monitoring of direct current. The measured values are shown on the large LED display of the PCE-N30H.


- Measuring range: ±100 / ±500 V DC; ±1 /±5 A DC
- Display range: -19,999 ... +99,999
- 21-point scaling
- IP 65 protection on the front

 

Manufacturer: PCE Instruments
£ 99.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N30O

The digital indicator PCE-N30O is a flexible counting device for industrial applications. Besides counting, the digital indicator is also capable of fulfilling frequency and revolution measurements, as well as period and runtime measurements. This, combined with the freely scalable counters, makes the digital indicator PCE-N30O suited to a wide field of application.


- Two internal counters
- IP 65 protection on the front
- Three-colored display
- Start/stop and reset input

 

Manufacturer: PCE Instruments
£ 102.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N30P

The digital indicator PCE-N30P can determine the most important system parameters of a single-phase network. Based on the current and voltage, the digital indicator PCE-N30P calculates the apparent, active and reactive power, as well as the phase difference angle and the power factor. The digital indicator can also determine the average power for a 15 minute period and the average voltage for a 10 minute period.


- Input: 0.02...6 A / 0...480 V / 45.00...100.00 Hz
- Accuracy: 0.2 %
- IP65 protected front
- Two alarm outputs

 

Manufacturer: PCE Instruments
£ 102.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ND10

The Power Digital indicator PCE-ND10 is able to perform current, voltage and power measurements in 3-phase systems. By using appropriate transducers, it is also possible to measure high currents and voltages with the Digital indicator. The Digital indicator PCE-ND10 was designed for panel-mounting in 92 x 92 mm panel cut-outs.


- Power meter for panel-mounting (92 x 92 mm)
- Measurement of U, I, f, P, Q, S, PF...
- Power supply via voltage input
- Alarm function

 

Manufacturer: PCE Instruments
£ 114.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N30B

The installation display PCE-N30B is a Modbus Master for up to 10 slave devices. This indicator can trigger, as well as display readings, trigger alarms, share readings, and save readings. The installation display PCE-N30B is used as a Modbus master in a Modbus network which enables the display to process multiple Modbus slaves that can be cycled through at the push of a button.


- Front Side IP 65
- Setting via Front Key
- Two Alarm Outputs
- Modbus master and slave 

 

Manufacturer: PCE Instruments
£ 128.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-ND30

The power display PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power meter PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power indicator can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.


- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus 

 

Manufacturer: PCE Instruments
£ 215.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N40B

All display systems installations displaying the PCE-N40B series, feature the Modbus panel display PCE-N40B for the universality and broad applicability. The panel display enables the reading from and writing to various Modbus devices. The values can be displayed numerically as well as in written form.


- Master and slave interface
- OLED
- Freely Programmable 

 

£ 229.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-N40U

The PCE-N40U Display System is used to directly display the measured values of force and weighing sensors. This display is equipped with a freely adjustable OLED display. The Weight Panel Display can be mounted horizontally or vertically, and the display can be set horizontally or vertically via the attached front buttons. The setting on the sensor can be done either by adjustment or by entering the mV / V parameter.


- Monochrome Yellow OLED display
- DMS display in 96 mm x 48 mm/3.77 in x 1.88 in format
- Sampling frequency up to 1.2 kHz (0.83 msec)
- For strain gauge input (4-wire) and potentiometer 

 

£ 246.00

Price excl. VAT &. delivery
2 year Warranty