Expansion module PAC PROFIBUS DP

• Plug-in communication module
• Module is automatically detected
• Programmable via front panel or software
• Cyclic and acyclic data transmission
• Easy integration using GSD file
• Baud rate of 9.6 kbit / s to 12 Mbit / s
• Connection via 9-pin Sub-D connector

The digital universal indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital universal indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital universal indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The frequency indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the frequency indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the frequency indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

PCE-N20U is a frequency indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The panel indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a panel indicator used for signal processing. Designed for quick and easy system integration, the digital panel indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The panel meter is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel meter suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel meter.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel meter also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a power indicator used for signal processing. Designed for quick and easy system integration, the digital power indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The power indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The pressure indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the pressure indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the pressure indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a pressure indicator used for signal processing. Designed for quick and easy system integration, the digital pressure indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The pressure indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The process indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the process indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the process indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a process indicator used for signal processing. Designed for quick and easy system integration, the digital process indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The process indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The digital temperature indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital temperature suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital temperature.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a digital temperature indicator used for signal processing. Designed for quick and easy system integration, the digital temperature indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The temperature indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The voltage indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the voltage indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the voltage indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital voltage indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The voltage indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.

• Power range: 220 to 240 V AC
• Frequency range: 50 / 60 Hz
• Acoustic alarm 

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.

• Power range: 220 to 240 V AC
• Frequency range: 50 / 60 Hz
• Acoustic alarm 

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.

• Power range: 220 to 240 V AC
• Frequency range: 50 / 60 Hz
• Acoustic alarm

 This condition monitoring environmental meter is a two-channel measuring instrument. The condition monitoring environmental meter offers a wide range of measurement options.

• K-type Food Thermometer with dual input
• Temperature range: -210 … 1372 °C / -346 … 2501 °F
• Direct measurement / differential measurement (T1-T2)
• Electronic zero offset
• Readings in °C, °F or Kelvin (K)

The crane scale is available with a measuring range of 0 … 300 kg / 0 … 661.4 lbs. With an accuracy of ± 1% of the measuring range, the crane scale is a precise measuring device. The LCD display of the crane scale has a digit height of 22 mm and is backlit.

• Measuring range: 0 … 300 kg / 0 … 661.4 lbs
• Resolution: 100 g
• Accuracy: ± 1% of full scale
• Units: kg, lb, N
• Including shackles and hooks

• 2-channel Digital Multimeter
• bandwidth: 10 MHz, sampling rate: 50 MS/s
• voltage: 0 ... 1000 V DC, 0 ... 750 V AC
• current: 0 ... 9.999 A AC/DC
• resistance, capacitance, temperature
• non-contact voltage detection
• signal generator: 1 Hz ... 2 MHz

• Measuring range: 0.0 … 14.0 pH
• Resolution: 0.01 pH
• Accuracy: ± 0.02 pH
• 100 points Datalogger
• (ATC) in the range 0 … 80°C / 32 … 176°F
• Waterproof to IP 67

• Measuring range: 0.0 … 14.0 pH
• Resolution: 0.01 pH
• Accuracy: ± 0.02 pH
• 100 points Datalogger
• (ATC) in the range 0 … 80°C / 32 … 176°F
• Waterproof to IP 67

This Food Thermometer is a two-channel measuring instrument. The Food Thermometer offers a wide range of measurement options.

• K-type Food Thermometer with dual input
• Temperature range: -210 … 1372 °C / -346 … 2501 °F
• Direct measurement / differential measurement (T1-T2)
• Electronic zero offset
• Readings in °C, °F or Kelvin (K)

• Torque: 0.01 ... 100 Nm
• Resolution: 0.01 Nm
• Accuracy: ±2% FS / ±2.5% FS
• Units: Nm, kgf cm, lbf ft, lbf in
• Internal memory: 999 values
• Adjustable alarm

• 2-channel Frequency Indicator
• bandwidth: 10 MHz, sampling rate: 50 MS/s
• voltage: 0 ... 1000 V DC, 0 ... 750 V AC
• current: 0 ... 9.999 A AC/DC
• resistance, capacitance, temperature
• non-contact voltage detection
• signal generator: 1 Hz ... 2 MHz

The hanging scales are available with a measuring range of 0 … 300 kg / 0 … 661.4 lbs. With an accuracy of ± 1% of the measuring range, the hanging balance is a precise measuring device. The LCD display of the hanging scales has a digit height of 22 mm and is backlit.

• Measuring range: 0 … 300 kg / 0 … 661.4 lbs
• Resolution: 100 g
• Accuracy: ± 1% of full scale
• Units: kg, lb, N
• Including shackles and hooks