Query results | PCE Instruments

Paint Thickness Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

£ 926.00

Price excl. VAT &. delivery

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 919.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate

£ 914.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate

£ 899.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Gloss Tester PCE-GM 55

£ 890.00

Price excl. VAT &. delivery

The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

Range : 0 … 200 gloss units / highlights
Accuracy: ± 1 gloss units
Repeatability: ± 0.5 gloss units
Optical angle: 20°, 45°, 75°
For medium and high gloss
Measurements on textiles and paper possible

Paint Thickness Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Paint Viscosity Tester PCE-RVI 1

£ 881.00

Price excl. VAT &. delivery

PCE-RVI 1 is an analogue viscometer or dial reading viscometer used in industrial and research applications to measure the viscosity of fluids such as paints, lacquers, inks, pastes, adhesives, plastics, greases and liquid food products. Under identical conditions, test results from an analogue viscometer are as accurate and reproducible as results from a digital viscometer. Thus, the PCE-RVI 1 analogue viscometer offers an affordable solution for viscosity measurement during product and material testing, development, production and quality control.

Rotational speed: 6, 12, 30, and 60 rpm
Viscosity range: 10 … 100,000 mPa.s / cP
Accuracy: ±5 % full scale (FS) in Newtonian fluids

Paint Thickness Tester PCE-TG 150A HT

£ 852.00

Price excl. VAT &. delivery

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Paint Test Equipment / Paint Testing Equipment LM-TC-F1000

£ 846.00

Price excl. VAT &. delivery

The Paint Test Equipment / Paint Testing Equipment works with a measuring probe that only requires a small contact surface and low contact pressure. The Paint Test Equipment / Paint Testing Equipment is barely larger than a measuring probe and is particularly suitable for measuring thin layers on uneven or complex surfaces, such as tin cans.

Measuring range: 2 ... 1000 µm
Resolution: 0.1 µm
for FE metals
Wireless interface for Windows, iOS and Android
OLED display
IP64 housing

Paint Thickness Tester PCE-CT 80-F5N3

£ 799.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Test Equipment / Paint Testing Equipment LM-TC-DUAL

£ 793.00

Price excl. VAT &. delivery

The Paint Test Equipment / Paint Testing Equipment has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Paint Test Equipment / Paint Testing Equipment with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Paint Thickness Tester PCE-CT 80-FN3

£ 790.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Thickness Tester PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"