Products for 'Digital Multimeter PCE DM 15 '

Three-Phase Digital Multimeter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Digital Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Multimeter / TRMS Multimeter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

Multimeter / TRMS Multimeter with network analyzer / power and energy meter with data logger.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Multimeter / TRMS Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 Multimeter / TRMS Multimeter is used to measure the current of 1- or 3-phase loads. This Multimeter / TRMS Multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Multimeter / TRMS Multimeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

HVAC Meter PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our fixed installation HVAC meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The fixed installation HVAC meter is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size: DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Ultrasonic Flow Test Instrument PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our ultrasonic flow test instrument, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow test instrument is suitable for small pipes with a diameter of DN15 / 1/2"and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size: DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Ultrasonic Flow Meter PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our ultrasonic flow meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size: DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Ultrasonic testing device PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size:DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Ultrasonic Flow Meter PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our ultrasonic flow meter , you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow meter is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range:0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe size: DN 15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Ultrasonic Flow Tester PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size:DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Portable Ultrasonic Flow Meter PCE-UFM 15

£ 845.00

Price excl. VAT &. delivery

With our portable ultrasonic flow meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Portable ultrasonic flow meter is suitable for small pipes with a diameter of DN15 / 1/2"" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size: DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Digital Universal Indicator PCE-BPD-C-66D

£ 801.00

Price excl. VAT &. delivery

The digital universal indicator is designed in such a way that the readings displayed can be read from a long distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for the display is 25 m or 50 m (82 ft or 164 ft).

Function: time measurement
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 11 … 36 V DC

Digital Universal Indicator PCE-BPD-P-66D

£ 801.00

Price excl. VAT &. delivery

Function: convert frequency to a usable value
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 11 … 36 V DC

Digital Universal Indicator PCE-BPD-P-66A

£ 801.00

Price excl. VAT &. delivery

Function: convert frequency to a usable value
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Digital Universal Indicator PCE-BPD-C-66A

£ 801.00

Price excl. VAT &. delivery

Function: time measurement
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Digital Thermometer PCE-EMD 10-ICA Incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 … 122.0 °F and the humidity measuring range is 0.0 … 99.9% RH.

Temperature measuring range: 32.0… 122.0 °F
Humidity measuring range: 0.0 … 99.9% RH
Connection of up to four external sensors
Analog 4 … 20-mA input signal
Wall mounting
Incl. ISO calibration certificate

Digital Thermometer PCE-EMD 5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

Temperature measuring range: 0.0 … 50.0 °C
Humidity measuring range: 0.0 … 99.9% RH
Connection of up to four external sensors
Analog 4 … 20 mA input signal
Wall mounting
incl. ISO Calibration Certificate

Digital Thermometer PCE-AQD 20-ICA Incl. ISO Calibration Certificate

£ 780.00

Price excl. VAT &. delivery

The digital thermometer is an ideal measuring device for monitoring the air quality at workplaces. The digital thermometer is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Force Gauge / Digital Force Gauge PCE-DFG 10 X-ICA incl. ISO-Calibration Certificate

£ 885.00

Price excl. VAT &. delivery

The Force Gauge / Digital Force Gauge / Digital Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely high accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, the tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge / Digital Force Gauge / Digital Force Gauge is supplied with an internal measuring cell and can measure forces up to 10 N.

measurement range: 0 ... 10 N
resolution: 0.005 N
accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
graphic display
measuring rate: 1 ... 7,200 Hz
incl. ISO calibration certificate

Force Gauge / Digital Force Gauge PCE-TM 200

£ 783.00

Price excl. VAT &. delivery

The Force Gauge / Digital Force Gauge is a portable electronic measuring device designed for the precise measurement of tensile stress in threads and linear materials. It is used in the wire and cable, textile and chemical fiber, metal and carbon fiber sectors, as well as in other industries. Stored data can be transferred from the Force Gauge / Digital Force Gauge to PC software.

Measuring range: 4 ... 200 cN
Resolution: 1 cN
Accuracy: ±2.5% FS
Units: cN, oz, kgf, N, lb
Memory: 41 data sets
Measurement modes: Peak, Real-Time, Hold
Sensor head width: 65 mm
PC software
Measurement on wires, fibers, or textiles

Force Gauge / Digital Force Gauge PCE-DFG 20 X-ICA incl. ISO-Calibration Certificate

£ 885.00

Price excl. VAT &. delivery

The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge is supplied with an external measuring cell and can measure forces up to 20 N.

Measuring range: 0 ... 20 N
Resolution: 0.01 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 200 X-ICA incl. ISO-Calibration Certificate

£ 885.00

Price excl. VAT &. delivery

Measuring range: 0 ... 200 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 5 X-ICA incl. ISO-Calibration Certificate

£ 885.00

Price excl. VAT &. delivery

Measuring range: 0 ... 5 N
Resolution: 0.001 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 1000 X-ICA incl. ISO-Calibration Certificate

£ 889.00

Price excl. VAT &. delivery

Measuring range: 0 ... 1000 N
Resolution: 0.5 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 500 X-ICA incl. ISO-Calibration Certificate

£ 872.00

Price excl. VAT &. delivery

Measuring range: 0 ... 500 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Three-Phase Power Meter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

1-Phase-Power Meter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Power Meter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

The Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Panel Meter PCE-BPD-C-66A

£ 801.00

Price excl. VAT &. delivery

The panel meter is designed in such a way that the readings displayed can be read from a long distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for the display is 25 m or 50 m (82 ft or 164 ft).

Function: time measurement
Input signal: NPN, PNP
Display range: -199,999 … 999,999
Number of outputs: 3
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Clamp Meter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

Three-Phase Clamp Meter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Clamp on Tester PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Current Clamp PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

The Three-Phase Current Clamp (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Three-Phase Electrical Tester PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

Three-Phase Electrical Tester with network analyzer / power and energy meter with data logger.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

HVAC Meter PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

HVAC Meter with network Analyzer / Clamp on Tester with data logger.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records

Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Power Data Logger PCE-GPA 62

£ 852.00

Price excl. VAT &. delivery

The power data logger (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.

Real-time test, register and measurement of voltage and current (real and effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Records up to 50,000 records