• Measuring range: 0 ... 20 N
• Resolution: 0.01 N
• Accuracy: ±0.05 % F.S.
• 32 GB memory for 30 million measuring points
• USB-C interface
• Graphic display
• Measuring rate: 1 ... 7200 Hz
• incl. ISO-Calibration Certificate

The pellets moisture meter PCE-PEL 20 was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the pellets moisture meter ensures high efficiency. The pellets moisture Analyzer performs a resistance moisture detection.

• Measuring range from 10 to 20 %
• Resolution 0.1 %
• 1000 mm measuring sensor

• bright 8 high power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 9150 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

PCE-PCO 1 is a laser particle counter, Hygiene Tester or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 Hygiene Tester:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust 80 MB internal memory and microSD card slot
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The wood moisture meter was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the wood moisture meter ensures high efficiency. The pellets moisture analyzer performs a resistance moisture detection.

• Measuring range: 10 % to 20 %
• Resolution: 0.1 %
• 1000 mm measuring sensor

PCE-PEL 20 is a portable handheld digital moisture analyzer used to measure the moisture or water content of pellets and biomass such as sawdust, wood chips, straw, hay, sunflower shells, buckwheat, corn and soy. Designed in collaboration with biomass power plant operators, this pellet moisture analyzer features automatic temperature compensation.

• 1000 mm / 39.37" long acid-proof steel measuring probe
• Moisture content measuring range: 10 … 20 %
• Temperature compensation range: 0 … +50 °C (32 … 122 °F)
• Resolution: 0.1 % moisture content
• Response time: Approx. 3 seconds

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• praphic display of measurement progress
• data logger
• application: measurements in low-ion media

• Measuring range: 0 ... 9999 RLU
• Resolution: 1 RLU
• Accuracy: ±2% or ±2 RLU
• Measuring time: 15 s
• Automatic calibration
• Memory for 3000 measurements
• Adjustable limit values

The pellets humidity detector was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the pellets moisture meter ensures high efficiency. The pellets moisture Analyzer performs a resistance moisture detection.

• Measuring range from 10 to 20 %
• Resolution 0.1 %
• 1000 mm measuring sensor

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

• 8 UVA high-performance LEDs
• light colour: 380 ... 390 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode