The Wood Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Wood Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance method
• For biomasses:
  such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

The wood moisture meter was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the wood moisture meter ensures high efficiency. The pellets moisture analyzer performs a resistance moisture detection.

• Measuring range: 10 % to 20 %
• Resolution: 0.1 %
• 1000 mm measuring sensor

The Moisture Tester for wood is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Moisture Tester for wood determines the absolute moisture of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance method
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

The Absolute Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Absolute Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance methods
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

The absolute moisture meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The absolute moisture meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw. 

• Fast moisture control
• Electrical resistance method
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

PCE-MA 110 is a halogen moisture meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles
• RS-232 interface or port

The moisture meter PCE-MA 202 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time

PCE-MA 110 is an absolute moisture meter or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The absolute moisture meter uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the absolute moisture meter can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.01 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.1 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles

The PCE-MA 202 is an oven-drying absolute moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the absolute moisture meter and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time

The pellets moisture meter PCE-PEL 20 was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the pellets moisture meter ensures high efficiency. The pellets moisture Analyzer performs a resistance moisture detection.

• Measuring range from 10 to 20 %
• Resolution 0.1 %
• 1000 mm measuring sensor

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

PCE-PCO 1 is a Aerosol meter / Aerosol measuring device or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

PCE-PCO 1 is a handheld particle-counting air quality meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

PCE-MA 110 is a halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Resolution: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles

PCE-PCO 1 is an airborne particle-counting hygiene meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 handheld particle counter:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

PCE-MA 110 is a halogen moisture balance that functions on the gravimetric or loss on drying (LOD) principle. The moisture balance uses the halogen method to dry the material sample. The moisture balance determines moisture content based on the weight difference before and after the drying procedure. Calibration of the moisture balance can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.01 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.1 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 15 drying profiles

The Xgard-1-CO is a single-gas Carbon Monoxide Meter used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O2 is a single-gas Oxygen Meter used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

PCE-MA 110 is a halogen moisture test instrument or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles

PCE-PEL 20 is a portable handheld digital moisture analyzer used to measure the moisture or water content of pellets and biomass such as sawdust, wood chips, straw, hay, sunflower shells, buckwheat, corn and soy. Designed in collaboration with biomass power plant operators, this pellet moisture analyzer features automatic temperature compensation.

• 1000 mm / 39.37" long acid-proof steel measuring probe
• Moisture content measuring range: 10 … 20 %
• Temperature compensation range: 0 … +50 °C (32 … 122 °F)
• Resolution: 0.1 % moisture content
• Response time: Approx. 3 seconds

The 1-Phase-Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

• Performance
• Power factor
• AC voltage and current
• DC voltage and current, resistance and frequency
• Incl. Data Cable and Test Leads
• Software available in the accessories tab
• Incl. ISO Calibration Certificate

PCE-MA 202 is an oven-drying moisture analyzer for weighing and heating material samples to determine moisture content. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture analyzer or moisture balance dries the sample to be weighed, and then calculates the moisture content from the weight difference.

• Weighing range: 200 g / 7.05 oz
• Moisture measurement range: 0 … 100 %
• Resolution: 10 mg / 0.01 g / 0.1 %
• Adjustable drying temperature and time
• Memory for up to 15 drying programs

PCE-MA 110 is a halogen relative humidity meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The relative humidity meter uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the relative humidity meter can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles
• RS-232 interface or port

The PCE-MA 202 is an oven-drying moisture analyzing balance for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the moisture analyzing balance and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing sample capacity: 200 g / 7.05 oz
• Moisture content measurement range: 0 … 100 %
• Readout, readability or resolution: 10 mg / 0.01 g / 0.1 %
• Adjustable drying temperature and time
• Memory for up to 15 drying programs

PCE-PCO 1 is a laser particle counter, Hygiene Tester or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 Hygiene Tester:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust 80 MB internal memory and microSD card slot
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

PCE-PCO 1 is a handheld laser particle counter, or dust measuring device, for measuring the concentration of particles in the air. The dust measuring device is battery powered to sample air quality in various environments.

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust 80 MB internal memory and microSD card slot
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

PCE-PCO 1 is a handheld data logger for measuring the concentration of particles in the air. The PCE-PCO 1 data logger:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The humidity detector is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The humidity detector determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance methods
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

PCE-PCO 1 is a Aerosol particle counter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The PCE-MA 202 is an oven-drying relative humidity meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the relative humidity meter and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time