Query results | PCE Instruments

£ 788.00

Price excl. VAT &. delivery

The Material Tester is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Material Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Material Tester PCE-TWT 50NM

£ 788.00

Price excl. VAT &. delivery

Material Tester for calibrating torque sensors and measuring the tightening torque of fasteners. The Material Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Meter / Torque Tester PCE-TWT 220NM

£ 788.00

Price excl. VAT &. delivery

The Torque Meter / Torque Tester is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Torque Meter / Torque Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Meter / Torque Tester PCE-TWT 50NM

£ 788.00

Price excl. VAT &. delivery

Torque Meter / Torque Tester for calibrating torque sensors and measuring the tightening torque of fasteners. The Torque Meter / Torque Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Wrench / Nut Runner PCE-TWT 220NM

£ 788.00

Price excl. VAT &. delivery

The Torque Wrench / Nut Runner is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Torque Wrench / Nut Runner enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Wrench / Nut Runner PCE-TWT 50NM

£ 788.00

Price excl. VAT &. delivery

Torque Wrench / Nut Runner for calibrating torque sensors and measuring the tightening torque of fasteners. The Torque Wrench / Nut Runner enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2,000 readings
Includes software for data export
Battery-powered

Universal Testing Machine PCE-TWT 220NM

£ 788.00

Price excl. VAT &. delivery

The Universal Testing Machine is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Universal Testing Machine enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2,000 readings
Includes software for data export
Battery-powered

Universal Testing Machine PCE-TWT 50NM

£ 788.00

Price excl. VAT &. delivery

Universal Testing Machine for calibrating torque sensors and measuring the tightening torque of fasteners. The Universal Testing Machine enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Automotive Tester PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Automotive Tester allows you to set the flash frequency in both FPM and Hz.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Car Measuring Device PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Car Measuring Device allows you to set the flash frequency in both FPM and Hz.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Condition Monitoring Stroboscope PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Handheld Tachometer PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Handheld Tachometer allows you to set the flash frequency in both FPM and Hz.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Rotation Meter PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Rotation Meter allows you to set the flash frequency in both FPM and Hz.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Stroboscope / Stroboscope Light PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Tachometer PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

£ 784.00

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Tachometer allows you to set the flash frequency in both FPM and Hz.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

1-Phase-Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate

£ 783.00

Price excl. VAT &. delivery

The 1-Phase-Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
Incl. ISO Calibration Certificate

Automotive Tester PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Car Measuring Device PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Industrial Scales PCE-SD 33C

£ 783.00

Price excl. VAT &. delivery

The industrial scales PCE-SD 33C are low-costrobustverifiablesystembalances.Thecalibration of theindustrial scales is according to thetradingclassM III. The sturdyfoundationof theindustrial scalesis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 30 kg
Readability:10g
Platform size: 500 x600mm
Calibration value:10 g
Certifiable:M III

Inventory Scale PCE-SD 33C

£ 783.00

Price excl. VAT &. delivery

The inventory scale PCE-SD 33C is a low-cost robust verifiable system balance. The calibration of the inventory scale is according to the trading class M III. The sturdy foundation of the inventory scale is made of painted steel and features a plastic-coated steel platform.

Weighing capacity: 30 kg
Readability: 10 g
Platform size: 500 x 600 mm
Calibration value: 10 g
Certifiable: M III

Material Tester PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Gauge PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Thickness Tester PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Parcel Scale PCE-SD 33C

£ 783.00

Price excl. VAT &. delivery

The parcel scale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of theparcel scale is according to thetradingclassM III.The sturdyfoundationof theparcel scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 30 kg
Readability:10g
Platform size: 500 x600mm
Calibration value:10 g
Certifiable:M III

Platform Scale PCE-SD 33C

£ 783.00

Price excl. VAT &. delivery

The platformscale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of theplatformscale is according to thetradingclassM III.The sturdyfoundationof theplatform scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 30 kg
Readability:10g
Platform size: 500 x600mm
Calibration value:10 g
Certifiable:M III

Portable Power Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate

£ 783.00

Price excl. VAT &. delivery

The power analyzer PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
incl. ISO Calibration Certificate

Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate

£ 783.00

Price excl. VAT &. delivery

The Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
Incl. ISO Calibration Certificate

Power Quality Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate

£ 783.00

Price excl. VAT &. delivery

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
incl. ISO Calibration Certificate

Shipping Scale PCE-SD 33C

£ 783.00

Price excl. VAT &. delivery

The shipping scale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of theshipping scale is according to thetradingclassM III.The sturdyfoundationof theshipping scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 30 kg
Readability:10g
Platform size: 500 x600mm
Calibration value:10 g
Certifiable:M III

Surface Tester PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Gauge PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-FN2D5

£ 783.00

Price excl. VAT &. delivery

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Trade Approved Scale PCE-SD 153C

£ 783.00

Price excl. VAT &. delivery

The trade approved scale PCE-SD153Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III.The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 150 kg
Readability:50g
Platform size: 500 x600mm
Calibration value:50 g
Certifiable:M III

Trade Approved Scale PCE-SD 303C

£ 783.00

Price excl. VAT &. delivery

The trade approved scale PCE-SD303Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III.The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

Weighing capacity: 300 kg
Readability:100g
Platform size: 500 x600mm
Calibration value:100 g
Certifiable:M III