Skip to main content
Accelerometer PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis accelerometer or vibration monitor with real-time measurement and data logging capabilities. This vibration analyzer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


  • Acceleration measuring range:0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Speed measuring range:  0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

Automotive Tester PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Automotive Tester allows you to set the flash frequency in both FPM and Hz. The Automotive Tester is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Car Measuring Device PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Car Measuring Device allows you to set the flash frequency in both FPM and Hz. The Car Measuring Device is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Concrete Test Hammer PCE-HT 224E with Digital Display
£ 694.00
Price excl. VAT &. delivery
Wireless
The Concrete Test Hammer is a measuring tool for testing the strength of concrete. The Concrete Test Hammer measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Concrete Test Hammer.  The Concrete Test Hammer is also suitable for measuring hardness of rolled paper.  The Concrete Test Hammer displays measurements Rebound Value and can display force in PSI (lbs / in²), MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
Condition Monitoring Accelerometer PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis Condition Monitoring Accelerometer or vibration monitor with real-time measurement and data logging capabilities. This Condition Monitoring Accelerometer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


  • Acceleration measuring range:0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Speed measuring range:  0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

 

Condition Monitoring Stroboscope PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. The Condition Monitoring Stroboscope is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Environmental Meter PCE-PH 228LAB-GEN
£ 694.00
Price excl. VAT &. delivery
The Environmental Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LC display, the Environmental Meter provides a clear and concise presentation of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure pH or redox values and temperature with external sensors.

  • measurement range -2 ... +20 pH (meter)
  • measurement range 0 ... 14 pH (electrode)
  • high accuracy ±0.002 pH + 2 digits
  • electrode application range: -5 ... +100 °C
  • GLP data management
  • simple 2, 3, 4 and 5-point calibration
  • calibration reminder
  • praphic display of measurement progress
  • data logger
  • application: chemical, pharmaceutical and food industry
Environmental Tester PCE-PH 228LAB-GEN
£ 694.00
Price excl. VAT &. delivery
The Environmental Tester stands for precision, user-friendliness and GLP compliance. With a high-resolution LC display, the Environmental Tester provides a clear and concise presentation of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure pH or redox values and temperature with external sensors.

  • measurement range -2 ... +20 pH (meter)
  • measurement range 0 ... 14 pH (electrode)
  • high accuracy ±0.002 pH + 2 digits
  • electrode application range: -5 ... +100 °C
  • GLP data management
  • simple 2, 3, 4 and 5-point calibration
  • calibration reminder
  • praphic display of measurement progress
  • data logger
  • application: chemical, pharmaceutical and food industry
Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

Gloss Meter PCE-PGM 60-ICA incl. ISO calibration certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

Handheld Tachometer PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Handheld Tachometer allows you to set the flash frequency in both FPM and Hz. The Handheld Tachometer is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Hardness Tester PCE-HT 224E with Digital Display
£ 694.00
Price excl. VAT &. delivery
Wireless
The Hardness Tester is a measuring tool for testing the strength of concrete. The Hardness Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Hardness Tester.  The Hardness Tester is also suitable for measuring hardness of rolled paper.  The Hardness Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
IoT Meter PCE-HT 224E with Digital Display
£ 694.00
Price excl. VAT &. delivery
Wireless
The IoT meter is a measuring tool for testing the strength of concrete. The IoT meter measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the IoT meter.  The IoT meter is also suitable for measuring hardness of rolled paper.  The IoT meter displays measurements Rebound Value and can display force in PSI (lbs / in²), MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
Material Tester PCE-HT 224E with Digital Display
£ 694.00
Price excl. VAT &. delivery
Wireless
The Material Tester is a measuring tool for testing the strength of concrete. The Material Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Material Tester.  The Material Tester is also suitable for measuring hardness of rolled paper.  The Material Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
NDT Test Instruments PCE-PGM 60-ICA incl. ISO calibration certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

NDT Tester - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

NDT Tester - Hardness Tester PCE-HT 224E with Digital Display
£ 694.00
Price excl. VAT &. delivery
Wireless
The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester.  The NDT Tester is also suitable for measuring hardness of rolled paper.  The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
Paint Gloss Tester PCE-GM 80-ICA incl. ISO Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

Paint Gloss Tester PCE-PGM 60-ICA incl. ISO calibration certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

pH Meter / pH Tester PCE-PH 228LAB-GEN
£ 694.00
Price excl. VAT &. delivery
The pH Meter / pH Tester stands for precision, user-friendliness and GLP compliance. With a high-resolution LC display, the pH Meter / pH Tester provides a clear and concise presentation of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure pH or redox values and temperature with external sensors.

  • measurement range -2 ... +20 pH (meter)
  • measurement range 0 ... 14 pH (electrode)
  • high accuracy ±0.002 pH + 2 digits
  • electrode application range: -5 ... +100 °C
  • GLP data management
  • simple 2, 3, 4 and 5-point calibration
  • calibration reminder
  • praphic display of measurement progress
  • data logger
  • application: chemical, pharmaceutical and food industry
Rotation Meter PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Rotation Meter allows you to set the flash frequency in both FPM and Hz. The Rotation Meter is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Shock Data Logger PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis accelerometer or shock data logger with real-time measurement and data logging capabilities. This single-axis shock data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this shock data logger compatlble with control systems.


  • Single-axis Acceleration measuring range:   0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Velocity measuring ranges:   0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

Stroboscope / Stroboscope Light PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Stroboscope / Stroboscope Light allows you to set the flash frequency in both FPM and Hz. The Stroboscope / Stroboscope Light is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Surface Tester PCE-HT 224E with Digital Display
£ 694.00
Price excl. VAT &. delivery
Wireless
The Surface Tester is a measuring tool for testing the strength of concrete. The Surface Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Surface Tester.  The Surface Tester is also suitable for measuring hardness of rolled paper.  The Surface Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

  • Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Digital Display of results
  • USB interface for connection to a PC
  • Data storage
  • Rechargeable battery
Surface Testing - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-PGM 60-ICA incl. ISO calibration certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-PGM 60 Surface Testing has a measuring geometry of 60°. The Surface Testing is used to analyze surfaces of different materials. Gloss measurements are particularly carried out in the production industry where products must have exactly the same characteristics.


  • Measurement geometry: 60° degree angle
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Measuring range: 0 … 300 GU
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate
  • Includes PC-compatible software for detailed analysis

Tachometer PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Tachometer allows you to set the flash frequency in both FPM and Hz. The Tachometer is pocket size, small and also mains-independent thanks to the rechargeable battery.

  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
UV measuring device / UV Light Meter PCE-LES 303-ICA incl. ISO-Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our UV measuring device / UV Light Meter. The UV measuring device / UV Light Meter is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.


  • 3 bright high-power LEDs
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • 6160 lux at 30 cm / 1000 Hz
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment using x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Vibration Analyzer PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis accelerometer or vibration analyzer with real-time measurement and data logging capabilities. This vibration monitor records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


  • Acceleration measuring range:0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Speed measuring range:  0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

Vibration Data Logger PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble with control systems.

  • Acceleration measuring range:   0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Velocity measuring ranges:   0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

Vibration Meter PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery
The single-axis vibration meter or monitor with real-time measurement and data logging capabilities. This vibration analyzer records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.

  • Acceleration measuring range:
      0.5 … 199.9 m/s, 
      0.05 … 20.39 g, 
      2 … 656 ft/s
  • Speed measuring range:
      0.5 … 199.9 mm/s,
      0.05 … 19.99 cm/s,
      0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface
Vibration Recorder PCE-VDR 10
£ 694.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis vibration recorder or monitor with real-time measurement and data logging capabilities. This vibration recorder records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


  • Acceleration measuring range:0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Speed measuring range:  0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

Water Analysis Meter PCE-PH 228LAB-GEN
£ 694.00
Price excl. VAT &. delivery
The Water Analysis Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LC display, the Water Analysis Meter provides a clear and concise presentation of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure pH or redox values and temperature with external sensors.

  • measurement range -2 ... +20 pH (meter)
  • measurement range 0 ... 14 pH (electrode)
  • high accuracy ±0.002 pH + 2 digits
  • electrode application range: -5 ... +100 °C
  • GLP data management
  • simple 2, 3, 4 and 5-point calibration
  • calibration reminder
  • praphic display of measurement progress
  • data logger
  • application: chemical, pharmaceutical and food industry
Gas Leak Detector Gasman-NO2 "Nitrogen Dioxide"
£ 693.00
Price excl. VAT &. delivery

The Gas Leak Detector Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


  • Non-rechargeable, 1-year battery
  • For NO2 (Nitrogen Dioxide)
  • Dust and water resistant - IP 65/67
  • 0 … 10 ppm

Gas Leak Detector Gasman-NO2 "Nitrogen Dioxide"
£ 693.00
Price excl. VAT &. delivery

The Gas Leak Detector Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


  • Non-rechargeable, 1-year battery
  • For NO2 (Nitrogen Dioxide)
  • Dust and water resistant - IP 65/67
  • 0 … 10 ppm

Air Quality Meter Gasman-H2 "Hydrogen"
£ 690.00
Price excl. VAT &. delivery

The Air Quality Meter Gasman-H2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


  • Non-rechargeable, 1-year battery
  • For H2 (Hydrogen)
  • Dust and water resistant - IP 65/67
  • 0… 1000 ppm