Query results | PCE Instruments

£ 68.00

Price excl. VAT &. delivery

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

Signal converter for RTD
Power supply via electricity loop
Low installation width

Signal Converter PCE-P17PT-2

£ 68.00

Price excl. VAT &. delivery

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

Signal converter for RTD
Power supply via electricity loop
Low installation width

Surface temperature sensor PCE-SP-202 K-Type

£ 68.00

Price excl. VAT &. delivery

Ideal for measuring surface temperature

Measuring range: up to 500 °C / 932 °F
Type: K
Spiral cable: 2000 mm / 78.7"
Handle: ABS / rubber
Length: 160 mm / 6.3"
Sensor head diameter: 30 mm / 1.1"
Reaction time (T90): 30 sec.

Air Flow Meter PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The air flow meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The air flow meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Air Quality Meter PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Air Quality Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Air Quality Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Air Velocity Meter PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The air velocity meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The air velocity meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Condition Monitoring PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This condition monitoring device enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this condition monitoring device is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C < 1000; 1°C > 1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Cup Anemometer PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The cup anemometer enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The cup anemometer is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Digital Thermometer PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Digital Thermometer enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics, and various evaluation functions, this Digital Thermometer is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C < 1000; 1°C > 1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Electrical Tester PCE-OFT 10

£ 67.00

Price excl. VAT &. delivery

The Electrical Tester combines an optical power meter (OPM), an optical light source and a red light source (VFL) in a compact measuring instrument for testing fibre optic connections. The Electrical Tester is suitable for installation, maintenance and troubleshooting in fibre optic networks.

Power: -70 ... 10 dBm
Optical power meter (OP): 850 ... 1650 nm
Red light source RL (VFL): 650 nm
Optical light source (Light Source): 1310, 1550 nm
Charging interface: USB Type-C
Compatible connectors: FC, SC and ST
REF function for relative power and insertion loss
Combined OPM and light source function

Electrical Tester PCE-OFT 10

£ 67.00

Price excl. VAT &. delivery

Power: -70 ... 10 dBm
Optical power meter (OP): 850 ... 1650 nm
Red light source RL (VFL): 650 nm
Optical light source (Light Source): 1310, 1550 nm
Charging interface: USB Type-C
Compatible connectors: FC, SC and ST
REF function for relative power and insertion loss
Combined OPM and light source function

Environmental Meter PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The environmental meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The environmental meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Environmental Meter PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Environmental Meter enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Environmental Meter is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C < 1000; 1°C > 1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Environmental Meter PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Environmental Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Environmental Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Environmental Tester PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The environmental tester enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The environmental tester is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Environmental Tester PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Environmental Tester enables fast, non-contact measurement of surface temperatures. With a dual-laser system, 20:1 optics and various evaluation functions, this Environmental Tester is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C < 1000; 1°C > 1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Environmental Tester PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Environmental Tester is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Environmental Tester has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Flow Meter PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The flow meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The flow meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Food Hygiene / Hygiene Test Equipment PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Food Hygiene / Hygiene Test Equipment enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Food Hygiene / Hygiene Test Equipment is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C <1000; 1°C >1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Food Thermometer / Thermometer for Food PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Food Thermometer / Thermometer for Food enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Food Thermometer / Thermometer for Food is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C <1000; 1°C >1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Formaldehyde Meter / Formaldehyde Tester PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Formaldehyde Meter / Formaldehyde Tester is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Formaldehyde Meter / Formaldehyde Tester has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Gas Detector / Gas Detection Instrument PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Gas Detector / Gas Detection Instrument is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Gas Detector / Gas Detection Instrument has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Gas Leak Detector PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Gas Leak Detector is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Gas Leak Detector has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Health & Safety PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Health & Safety enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Health & Safety is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C <1000; 1°C >1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Health & Safety PCE-SRM 10

£ 67.00

Price excl. VAT &. delivery

The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. Thanks to its compact design and ease of use, the Health & Safety is ideal for both mobile applications and stationary measurements.

Surface resistance: 10³ Ω ... 10¹⁰ Ω
Accuracy: 1 decade
Temperature: 0 ... 50°C / 32 ... 122°F
Accuracy: ±2°C / ±3.6°F
Hold function

HVAC Meter PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The HVAC meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The HVAC meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature measurement in C° / F°
Beaufort scale
Cup cross - sensor

Infrared Thermometer PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Infrared Thermometer enables fast, non-contact measurement of surface temperatures. With a dual-laser, 20:1 optics and various evaluation functions, this Infrared Thermometer is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C < 1000; 1°C > 1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

ISO certificate CAL-PCE-PH for pH meters

£ 67.00

Price excl. VAT &. delivery

ISO certificate for pH meters

Probe Thermometer PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Probe Thermometer enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Probe Thermometer is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C <1000; 1°C >1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Pyrometer PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Pyrometer enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Pyrometer is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C for temperatures below 1000°C; 1°C for temperatures above 1000°C
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Surface Testing PCE-SRM 10

£ 67.00

Price excl. VAT &. delivery

The Surface Testing is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. Thanks to its compact design and ease of use, the Surface Testing is ideal for both mobile applications and stationary measurements.

Surface resistance: 10³ Ω ... 10¹⁰ Ω
Accuracy: 1 decade
Temperature: 0 ... 50°C / 32 ... 122°F
Accuracy: ±2°C / ±3.6°F
Hold function

Temperature Meter PCE-A 430

£ 67.00

Price excl. VAT &. delivery

The temperature meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The temperature meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

Measuring range: 30 m/s
Wind speed up to 105 km/h
Units: m/s, km/h, kn, mph
Temperature: -20 °C ... +50 °C
Beaufort scale
Cup cross - sensor

Temperature Meter PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This Temperature Meter enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this Temperature Meter is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C <1000; 1°C >1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Temperature Meter PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Temperature Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Temperature Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory

Thermometer PCE-IR 836C

£ 67.00

Price excl. VAT &. delivery

This thermometer enables fast, non-contact measurement of surface temperatures. With a dual laser, 20:1 optics and various evaluation functions, this thermometer is suitable for reliable temperature monitoring.

IR measuring range: -50 … 1000°C
Resolution: 0.1°C
Accuracy: ±1.0% of reading (depending on the measuring range)
Type K measuring range: -50 … 1370°C
Resolution: 0.1°C <1000; 1°C >1000
Accuracy: ±0.5% of reading (depending on the measuring range)
Measurement spot ratio (D:S): 20:1
Spectral range: 8 ... 14 μm
Circular laser target guide

Thermometer PCE-VOC 5

£ 67.00

Price excl. VAT &. delivery

The Thermometer is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Thermometer has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
TVOC: 0 ... 10 mg/m³
Temperature: 0 ... 50°C / 32 ... 122°F
Relative humidity: 10 ... 90%
Acoustic alarm
Integrated rechargeable battery
Internal memory