With the table-top environmental meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the environmental meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

• pH measuring range: -2.000 … +19.999 pH
• Resolution: 0.1 / 0.01 pH
• Measuring range mV: -1999.9 … +1999.9 mV
• Resolution: 1 mV
• Temperature measuring range: -10 … +110 °C / 14 … 230 °F
• Resolution: 0.1 °C
• USB and Bluetooth interface
• Memory for 300 measured values
• Live viewing software
• 3 point calibration

With the table-top environmental tester it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the environmental tester it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

• pH measuring range: -2.000 … +19.999 pH
• Resolution: 0.1 / 0.01 pH
• Measuring range mV: -1999.9 … +1999.9 mV
• Resolution: 1 mV
• Temperature measuring range: -10 … +110 °C / 14 … 230 °F
• Resolution: 0.1 °C
• USB and Bluetooth interface
• Memory for 300 measured values
• Live viewing software
• 3 point calibration

With the table-top redox meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the redox meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

• pH measuring range: -2.000 … +19.999 pH
• Resolution: 0.1 / 0.01 pH
• Measuring range mV: -1999.9 … +1999.9 mV
• Resolution: 1 mV
• Temperature measuring range: -10 … +110 °C / 14 … 230 °F
• Resolution: 0.1 °C
• USB and Bluetooth interface
• Memory for 300 measured values
• Live viewing software
• 3 point calibration

With the table-top pH meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the pH meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

• pH measuring range: -2.000 … +19.999 pH
• Resolution: 0.1 / 0.01 pH
• Measuring range mV: -1999.9 … +1999.9 mV
• Resolution: 1 mV
• Temperature measuring range: -10 … +110 °C / 14 … 230 °F
• Resolution: 0.1 °C
• USB and Bluetooth interface
• Memory for 300 measured values
• Live viewing software
• 3 point calibration

With the table-top water analysis meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the water analysis meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

• pH measuring range: -2.000 … +19.999 pH
• Resolution: 0.1 / 0.01 pH
• Measuring range mV: -1999.9 … +1999.9 mV
• Resolution: 1 mV
• Temperature measuring range: -10 … +110 °C / 14 … 230 °F
• Resolution: 0.1 °C
• USB and Bluetooth interface
• Memory for 300 measured values
• Live viewing software
• 3 point calibration

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The condition monitoring data logging device is used to determine volume. The condition monitoring data logging device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the condition monitoring data logging device. In addition, the condition monitoring data logging device has an SD card slot that enables the use of an SD card as an additional storage medium.

• Measuring range: SPL: Auto 30 … 130 dB
• Resolution: 0.1 dB
• Low sampling rate
• Automatic or manual storage
• Selectable storage interval
• Backlit LC display
• Dose measurement or SPL measurement

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

The data logger PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this data logger in the range between -100 … 2000 kPa. The data logger PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The data logging sound level meter is used to determine volume. The PCE-NDL 10 data logging sound level meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data logging sound level meter has an SD card slot that enables the use of an SD card as an additional storage medium.

• Measuring range: SPL: Auto 30 … 130 dB
• Resolution: 0.1 dB
• Low sampling rate
• Automatic or manual storage
• Selectable storage interval
• Backlit LC display
• Dose measurement or SPL measurement

The data-logging decibel meter is used to determine volume. The PCE-NDL 10 data-logging decibel meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging decibel meter has an SD card slot that enables the use of an SD card as an additional storage medium.

• Measuring range: SPL: Auto 30 … 130 dB
• Resolution: 0.1 dB
• Low sampling rate
• Automatic or manual storage
• Selectable storage interval
• Backlit LC display
• Dose measurement or SPL measurement

The data-logging noise meter / sound meter  is used to determine volume. The PCE-NDL 10 data-logging noise meter / sound meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise meter / sound meter has an SD card slot that enables the use of an SD card as an additional storage medium.

• Measuring range: SPL: Auto 30 … 130 dB
• Resolution: 0.1 dB
• Low sampling rate
• Automatic or manual storage
• Selectable storage interval
• Backlit LC display
• Dose measurement or SPL measurement

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

The relative pressure HVAC meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this HVAC pressure meter in the range between -100 … 2000 kPa. The relative pressure HVAC meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative/ -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The relative pressure manometer PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure manometer in the range between -100 … 2000 kPa. The relative pressure manometer PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative/ -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The data-logging noise dose meter  is used to determine volume. The PCE-NDL 10 data-logging noise dose meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise dose meter has an SD card slot that enables the use of an SD card as an additional storage medium.

• Measuring range: SPL: Auto 30 … 130 dB
• Resolution: 0.1 dB
• Low sampling rate
• Automatic or manual storage
• Selectable storage interval
• Backlit LC display
• Dose measurement or SPL measurement

The relative pressure gauge PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure gauge in the range between -100 … 2000 kPa. The relative pressure gauge PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The relative pressure meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure meter in the range between -100 … 2000 kPa. The relative pressure meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative  / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The Agricultural measuring device stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Agricultural measuring device provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products
• incl. ISO-Calibration Certificate

The Agricultural measuring device stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Agricultural measuring device provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products
• incl. ISO-Calibration Certificate

• Measurement range: 1.20 ... 300.0 mm
• Resolution: 0.01 mm at ≤99.99 mm
• Accuracy: ±0.5 % of Rd. + 0.05 mm
• Memory capacity: 1500 measured values
• Calibration reference on housing
• Probe temperature range: -10 ... 60 °C
• Thickness measurement of cast materials
• incl. ISO-Calibration Certificate

The Environmental Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Environmental Meter provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products
• incl. ISO-Calibration Certificate

The Environmental Tester stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Environmental Tester provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products
• incl. ISO-Calibration Certificate