The dual infrared temperature meter is used for fast surface temperature measurement. The two laser points of the infrared temperature meter PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

• Temperature measurement up to 1600°C / 2912°F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution: 60:1- Adjustable emissivity
•  Can be calibrated
• Suitable for long-term measurements

The Temperature Meter PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the temperature meter can be adjusted, depending on the operation purpose. Besides taking infrared images, the temperature meter can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.

• Measurement range: -20 … +600°C / -4 … 1112°F
• Accuracy: ±2%, ±2°C / 3.6°F
• Frequency image recording: 9 Hz
• Camera: 32 x 31 Pixel

The temperature meter with microprocessor is a high precision 1-channel temperature gauge. The temperature meter with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

• 1 channel temperature recorder
• Automatic shutdown
• High accuracy of ± 2% r.H.
• Sampling rate of 2 / sec
• Memory size: 5,000 values
• Incl. ISO calibration certificate

The PCE-VA 20-SET is a multi-functional temperature meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate

The temperature data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the temperature data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The data logger for temperature and humidity is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger for temperature and humidity determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The multifunction pH meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

The Temperature Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Temperature Data Logger with microprocessor is ideal for use with various Pt100 sensors. The temperature logging test instruments are manufacturer calibrated (ISO calibration certificate is included).

• High precision: ±2% r.H.
• 1 channel temperature Recorder
• Automatic shutdown
• Memory size: 5,000 values
• Sampling rate: 2/sec.
• Incl. ISO calibration certificate

The PCE-VA 20-SET is a multi-functional air flow meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• Incl. ISO Calibration Certificate

The PCE-VA 20-SET is a multi-functional air flow meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• Incl. ISO Calibration Certificate

The PCE-VA 20-SET is a multi-functional wind speed meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate

The PCE-VA 20-SET is a multi-functional HVAC meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• Incl. ISO Calibration Certificate

FME is a handheld multifunction moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.

• Measuring range: 5-99% for wood / 0-99% for building materials
• Resolution: 0.1%
• Accuracy: ±0.2%

The temperature data logger with microprocessor is a high precision 1-channel temperature gauge. The temperature data logger with microprocessor is ideal for use with various Pt100 sensors.

• High precision: ±2% r.H.
• 1 channel temperature Recorder
• Automatic shutdown
• Memory size: 5,000 values
• Sampling rate: 2/sec.
• Incl. ISO calibration certificate

The HVAC meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The HVAC meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The water analysis meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable water analysis meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

The environmental meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The PCE-228WINE environmental meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the environmental meter to a PC via the RS-232 interface.

• Measuring range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ± (0.02 pH + 2d)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232
• Especially for wine, beer and other solutions with low conductivity

The PCE-228WINE pH meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface.

• Measuring range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ± (0.02 pH + 2d)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232
• Especially for wine, beer and other solutions with low conductivity

The Flow Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Flow Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The PCE-228WINE water analysis meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the water analysis meter to a PC via the RS-232 interface.

• Measuring range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ± (0.02 pH + 2d)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232
• Especially for wine, beer and other solutions with low conductivity

The pressure meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The pressure meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The Environmental Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Environmental Meter provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products

The Air Velocity Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Air Velocity Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

• measurement range: 20 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB
• measurement functions: HOLD, MAX, LEQ
• time weighting: F, S and I
• frequency weighting: A, C and Z
• frequency range: 20 ... 8000 Hz
• standards: IEC 61672-1 (class II)

The pH Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the pH Meter provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products

The wind speed meter  is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The wind speed meter has many different pressure measuring functions.

• Measuring range:
  ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The Water Analysis Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Water Analysis Meter provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation. It is possible to measure the pH or redox value and temperature with external sensors.

• measurement range -2 ... +20 pH (meter)
• measurement range 0 ... 14 pH (electrode)
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• GLP data management
• simple 2, 3, 4 and 5-point calibration
• calibration reminder
• graphical display of the measurement process
• data logger
• especially for beer, blood, dairy products

The air flow meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The air flow meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The Environmental Meter stands for precision, user-friendliness and GLP compliance. With a high-resolution LCD screen, the Environmental Meter provides a clear and concise display of the measured values. GLP compliance is guaranteed by automatic data recording and traceable documentation.

• measurement range -2 ... +20 pH
• high accuracy ±0.002 pH + 2 digits
• adjustable resolution: 0.1 pH, 0.01 pH, 0.001 pH
• simple 2, 3, 4 and 5-point calibration
• graphical display of the measurement process
• GLP data management
• data logger
• pH electrode for higher temperatures up to 80 °C

The PCE-VA 20-SET is a multi-functional wind measurer including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate