The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Our Condition Monitoring Sound Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Condition Monitoring Sound Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
Our Decibel Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Decibel Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
Our Environmental Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Environmental Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
Our Environmental Tester is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Environmental Tester records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
The force gage is suitable for panel mounting. This force gage can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gage.
The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.
The force indicator is suitable for panel mounting. This force indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator.
Our Health & Safety Sound meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Health & Safety Sound meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
The indicator is suitable for panel mounting. This indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator.
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Our Noise Meter / Sound Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Noise Meter / Sound Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The panel meter is suitable for panel mounting. This panel meter can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter.
Our Sound Level Meter / Noise Level Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Sound Level Meter / Noise Level Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.
Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
The weight indicator is suitable for panel mounting. This weight indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the weight indicator.
Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Defectoscope. The Defectoscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Flaw Detector. The Flaw Detector is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our UV measuring device / UV Light Meter. The UV measuring device / UV Light Meter is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our UV Meter / UV Tester. The UV Meter / UV Tester is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Vibration Analyzer / Vibration Analyser. The Vibration Analyzer / Vibration Analyser is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
Analysing the movement of rotating machines is quick and easy with our Vibration Meter / Vibration Tester. The Vibration Meter / Vibration Tester is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 317 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz and it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.
3 high-power UVA LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
