The PCE-DDD 10 Shore D Material Tester is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital Material Tester has a reading accuracy of 0.1 hardness units. The Material Tester comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore D hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-DDA 10 Shore A Material Tester is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital Material Tester has a reading accuracy of 0.1 hardness units. The Material Tester comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore A hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-HT-75 Material Tester for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Material Tester in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

• Measurement range: 1.20 ... 300.0 mm
• Resolution: 0.01 mm at ≤99.99 mm
• Accuracy: ±0.5 % of Rd. + 0.05 mm
• Memory capacity: 1500 measured values
• Calibration reference on housing
• Probe temperature range: -10 ... 60 °C
• Thickness measurement of cast materials

The material thickness meter for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The material thickness meter stands out due to its high range of measurement.

• Measurement range: 0 … 1250 µm / 49.2 mils
• Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils)  1 µm / 0.04 mils (above the range)
• Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
• Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
• Incl. ISO Calibration Certificate

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore A measurements
• Single and Serial Measurements
• Data transfer to PC

The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore A hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore A measurements
• Single and Serial Measurements
• Data transfer to PC

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore D measurements
• Single and Serial Measurements
• Data transfer to PC

PCE-CT 27FN is a material thickness meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

• Measuring range of 0 … 1250 µm / 0 … 50 mils
• Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
• Features a resolution of 0.1 µ / 0.1 mils
• Incl. ISO Calibration Certificate

The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore D hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore D measurements
• Single and Serial Measurements
• Data transfer to PC

PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

• PM channels: PM 2.5, PM 10
• Particle sizes (in micrometers): 2.5 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• 2" full-color LCD with user-friendly graphics
• Integrated data logger with adjustable sampling time
• Internal memory stores up to 5000 date-and-time-stamped data sets

The PCE-MPC 10 is a portable handheld dust monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this dust monitor also measures air temperature and relative humidity (RH).

• PM channels: PM 2.5, PM 10
• Particle sizes (in micrometers): 2.5 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• 2" full-color LCD with user-friendly graphics
• Integrated data logger with adjustable sampling time
• Internal memory stores up to 5000 date-and-time-stamped data sets

PCE-MPC 10 is a portable handheld Aerosol particle counter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

• PM channels: PM 2.5, PM 10
• Particle sizes (in micrometers): 2.5 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• 2" full-color LCD with user-friendly graphics
• Integrated data logger with adjustable sampling time
• Internal memory stores up to 5000 date-and-time-stamped data sets

PCE-MPC 10 is a portable handheld dust particle measuring device or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

• PM channels: PM 2.5, PM 10
• Particle sizes (in micrometers): 2.5 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• 2" full-color LCD with user-friendly graphics
• Integrated data logger with adjustable sampling time
• Internal memory stores up to 5000 date-and-time-stamped data sets

The panel meter is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this panel meter is versatile.

• Measuring range: 0 … 145 psi, 0 … 10 bar
• Resolution: 0.145 psi, 0.01 bar
• Scaled bar graph
• Measurable media: gases, water
• incl. ISO Calibration Certificate