• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

The Air Flow Meter PCE-WSAC 50-111 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-121 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-211 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-221 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-311 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 24 V DC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Flow Meter PCE-WSAC 50-321 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 24 V DC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

The Air Velocity Meter PCE-WSAC 50-111 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-121 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-211 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-221 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-311 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 24 V DC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-321 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 24 V DC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-111 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-121 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-211 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-221 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 115 V AC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-311 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 24 V DC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-321 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 24 V DC
• Input signal: 0 … 10 V
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The automotive tester / borescope is an inspection camera for non-destructive measurements. Thus the automotive tester / borescope is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the automotive tester / borescope.

• Camera head diameter: Ø 9 mm / 0.4"
• Cable length: 3 m / 9.9 ft
• Interface: Micro USB 2.0
• Storage: Micro SD card
• Front and side view cameras

The car measuring device is an inspection camera for non-destructive measurements. Thus the car measuring device is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the car measuring device.

• Camera head diameter: Ø 9 mm / 0.4"
• Cable length: 3 m / 9.9 ft
• Interface: Micro USB 2.0
• Storage: Micro SD card
• Front and side view cameras

• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

• Camera head diameter: Ø 9 mm / 0.4"
• Cable length: 3 m / 9.9 ft
• Interface: Micro USB 2.0
• Storage: Micro SD card
• Front and side view cameras

• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate

PCE-910 is a portable handheld digital differential pressure manometer, meter or gauge used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate