The hygrometer is used to measure air quality. The hygrometer measures carbon dioxide, temperature and humidity. The CO2 sensor of the hygrometer is disconnected from the main unit with a connection cable.
The thermometer is used to measure air quality. The thermometer measures carbon dioxide, temperature and humidity. The CO2 sensor of the thermometer is disconnected from the main unit with a connection cable.
The CO2 Analyser PCE-AQD 10 is used to measure air quality. The CO2 analyser measures carbon dioxide, temperature and humidity. The CO2 sensor from the CO2 analyser is disconnected from the main unit with a connection cable.
The gas detector PCE-AQD 10 is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor from the gas detector is disconnected from the main unit with a connection cable.
The temperature meter PCE-AQD 10 is used to measure air quality. The temperature meter measures carbon dioxide, temperature and humidity. The CO2 sensor from the temperature meter is disconnected from the main unit with a connection cable.
The environmental meter PCE-AQD 10 is used to measure air quality. The environmental meter measures carbon dioxide, temperature and humidity. The CO2 sensor from the environmental meter is disconnected from the main unit with a connection cable.
The digital thermometer is used to measure air quality. The digital thermometer measures carbon dioxide, temperature and humidity. The CO2 sensor of the digital thermometer is disconnected from the main unit with a connection cable.
The climate meter is used to measure air quality. The climate meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the climate meter is disconnected from the main unit with a connection cable.
The thermo hygrometer is used to measure air quality. The thermo hygrometer measures carbon dioxide, temperature and humidity. The CO2 sensor of the thermo hygrometer is disconnected from the main unit with a connection cable.
The environmental tester PCE-AQD 10 is used to measure air quality. The environmental tester measures carbon dioxide, temperature and humidity. The CO2 sensor from the environmental tester is disconnected from the main unit with a connection cable.
The humidity detector is used to measure air quality. The humidity detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the humidity detector is disconnected from the main unit with a connection cable.
The air humidity meter is used to measure air quality. The air humidity meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the air humidity meter is disconnected from the main unit with a connection cable.
The carbon dioxide meter PCE-AQD 10 is used to measure air quality. The carbon dioxide meter measures carbon dioxide, temperature and humidity. The CO2 sensor from the carbon dioxide meter is disconnected from the main unit with a connection cable.
The gas leak detector PCE-AQD 10 is used to measure air quality. The gas leak detector measures carbon dioxide, temperature and humidity. The CO2 sensor from the gas leak detector is disconnected from the main unit with a connection cable.
The CO2 data logger PCE-AQD 10 is used to measure air quality. The CO2 data logger measures carbon dioxide, temperature and humidity. The CO2 sensor from the CO2 data logger is disconnected from the main unit with a connection cable.
The air quality station is used to measure air quality. The air quality meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the air quality station is disconnected from the main unit with a connection cable.
The temperature data logger is used to measure air quality. The temperature data logger measures carbon dioxide, temperature and humidity. The CO2 sensor of the temperature data logger is disconnected from the main unit with a connection cable.
The air quality meter is used to measure air quality. The air quality meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the air quality meter is disconnected from the main unit with a connection cable.
The relative humidity meter is used to measure air quality. The relative humidity meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the relative humidity meter is disconnected from the main unit with a connection cable.
The decibel meter PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 decibel meter is able to display the measured values on a display and output them as a 4 … 20-mA analog value.
Measuring range: 30 … 130 dB
Measurement accuracy: Based on class 2 according to IEC61672
The noise meter PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 noise meter is able to display the measured values on a display and output them as a 4 … 20-mA analog value.
Measuring range: 30 … 130 dB
Measurement accuracy: Based on class 2 according to IEC61672
The lux meter has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the lux meter can be positioned appropriately for every measuring task.
The environmental meter has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the environmental meter can be positioned appropriately for every measuring task.
The illuminometer has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the illuminometer can be positioned appropriately for every measuring task.
The photometer has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the photometer can be positioned appropriately for every measuring task.
The clamp on tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the clamp on tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the clamp on tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable clamp on tester with 1 m / 3.3 ft cable
The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
The digital multimeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the digital multimeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the digital multimeter, the digital multimeter itself is connected to a 1 meter / 3.3 ft cable.
Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable digital multimeter with 1 m / 3.3 ft cable
The process clamp meter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the process clamp meter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the process clamp meter, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable process clamp meter with 1 m / 3.3 ft cable
The voltmeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the voltmeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the voltmeter, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
The handheld tachometer uses the so-called "stroboscope effect" to analyse fast movements, vibrations or periodic processes. With the help of 9 high-intensity LEDs, the handheld tachometer generates short flashes of light with an illuminance of up to 1500 lx. These flashes of light are emitted in synchronisation with the frequency of the movement to be monitored until the object appears to stand still to the observer.
The tachometer uses the so-called "stroboscope effect" to analyse fast movements, vibrations or periodic processes. With the help of 9 high-intensity LEDs, the tachometer generates short flashes of light with an illuminance of up to 1500 lx. These flashes of light are emitted in synchronisation with the frequency of the movement to be monitored until the object appears to stand still to the observer.
The radiation detector has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the radiation detector can be positioned appropriately for every measuring task.
The automotive tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the automotive tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the automotive tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable automotive tester with 1 m / 3.3 ft cable
The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
The electrical tester has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the electrical tester is a particularly accurate measuring instrument. In order to conveniently perform measurements with the electrical tester, the current clamp itself is connected to a 1 meter / 3.3 ft cable.
Measuring range 1: ±20.99 mA DC
Measuring range 2: ±21.0 … ±99.9 mA DC
Diameter of clamp opening: Ø5 mm
Detachable electrical tester with 1 m / 3.3 ft cable
