Skip to main content
Automotive Tester / Borescope PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The PCE-VE 200SV1 automotive tester is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 automotive tester is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the automotive tester PCE-VE 200SV1.

  • Camera head diameter 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Car Measuring Device PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The car measuring device PCE-VE 200SV1 videoscope is a nondestructive inspection camera. Thus, the car measuring device is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction industry are among the main applications of the car measuring device.


  • Camera head diameter: 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Condition Monitoring Industrial Borescope PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The condition monitoring industrial borescope is a nondestructive inspection camera. Thus, the condition monitoring industrial borescope is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the condition monitoring industrial borescope.

 

  • Camera head diameter 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

 

Environmental Meter PCE-GA 25
£ 427.00
Price excl. VAT &. delivery
The Environmental Meter enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Environmental Meter detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
Environmental Tester PCE-GA 25
£ 427.00
Price excl. VAT &. delivery
The Environmental Tester enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Environmental Tester detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
Gas Detector / Gas Detection Instrument PCE-GA 25
£ 427.00
Price excl. VAT &. delivery
The Gas Detector / Gas Detection Instrument enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Gas Detector / Gas Detection Instrument detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
Gas Leak Detector PCE-GA 25
£ 427.00
Price excl. VAT &. delivery
The Gas Leak Detector enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Gas Leak Detector detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
Health & Safety PCE-GA 25
£ 427.00
Price excl. VAT &. delivery
The Health & Safety enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Health & Safety detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
HVAC Meter PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The PCE-VE 200SV1 HVAC meter is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 HVAC meter is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the HVAC meter PCE-VE 200SV1.

  • Camera head diameter 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Industrial Borescope PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The PCE-VE 200SV1 industrial borescope is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 industrial borescope is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the industrial borescope PCE-VE 200SV1.

  • Camera head diameter 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Inspection Camera PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The PCE-VE 200SV1 inspection camera is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 inspection camera is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the inspection camera PCE-VE 200SV1.

  • Camera head diameter 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Leak Detector PCE-GA 25
£ 427.00
Price excl. VAT &. delivery
The Leak Detector enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Leak Detector detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
NDT Test Instruments PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The NDT test Instrument PCE-VE 200SV1 is a nondestructive inspection camera. Thus, the NDT test Instrument is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction industry are among the main applications of the NDT test Instrument.


  • Camera head diameter: 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Snake Camera PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The snake camera is a nondestructive inspection camera. Thus, the snake camera is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction industry are among the main applications of the snake camera.


  • Camera head diameter: 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera
Videoscope PCE-VE 200SV1
£ 427.00
Price excl. VAT &. delivery

The PCE-VE 200SV1 videoscope is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 videoscope is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction industry are among the main applications of the videoscope camera PCE-VE 200SV1.


  • Camera head diameter: 9 mm / 0.4 in
  • Cable length: 1 m / 3.3 ft 
  • Interface: Micro USB 2.0
  • Memory: Micro SD card
  • Front and side view camera

Car Measuring Device PCE-DSX 20 with Trigger Input
£ 425.00
Price excl. VAT &. delivery
The car measuring device PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
Condition Monitoring Stroboscope PCE-DSX 20 with Trigger Input
£ 425.00
Price excl. VAT &. delivery
The condition monitoring stroboscope is mostly used for speed or vibration measurement or for motion observations. This condition monitoring stroboscope has a small design and has a low weight. Thus, the condition monitoring stroboscope can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
Handheld Tachometer PCE-DSX 20 with Trigger Input
£ 425.00
Price excl. VAT &. delivery
The handheld tachometer PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This handheld tachometer  has a small design and has a low weight. Thus, the handheld tachometer can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
Stroboscope PCE-DSX 20 with Trigger Input
£ 425.00
Price excl. VAT &. delivery
The stroboscope PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This stroboscope has a small design and has a low weight. Thus, the stroboscope can be conveniently used even in measurements in hard to reach places.


  • Flash frequency: 50 … 35000 FPM
  • Accuracy: ±(0.05% of measured value + 2 Dgt)
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • with trigger input
Tachometer PCE-DSX 20 with Trigger Input
£ 425.00
Price excl. VAT &. delivery
The tachometer PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This tachometer has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
  • Speed: 50 … 35000 RPM / FPM
  • Flash frequency
  • phase shift
  • Lamp type: Xenon flash
  • Flash response time: 10 … 30 μs
  • With trigger input
Accelerometer PCE-VT 1100-ICA incl. ISO Calibration Certificate
£ 424.00
Price excl. VAT &. delivery

The accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO Calibration Certificate


Accelerometer PCE-VT 1100S-ICA incl. ISO Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The accelerometer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this accelerometer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Portable and battery operated
  • Needle probe: 45mm / 1.77"
  • incl. ISO Calibration Certificate

Accessories PCE-VT 1100-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The accessory is designed for quick measurements of imbalance in machines and the examination of bearings and gears. The accessory is also frequently used to evaluate the state of small electronic motors. The meter can only be used for real-time measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO-Calibration Certificate
Acoustic Imaging Camera PCE-VT 1100-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The Acoustic Imaging Camera is designed for quick measurements of imbalance in machines and the examination of bearings and gears. The Acoustic Imaging Camera is also frequently used to evaluate the state of small electronic motors. The meter can only be used for realtime measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO-Calibration Certificate
Acoustic Imaging Camera PCE-VT 1100S-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The Acoustic Imaging Camera is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this Acoustic Imaging Camera is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration
  • Portable and battery-operated
  • Needle probe: 45 mm / 1.77 in
  • incl. ISO-Calibration Certificate
Aerosol meter / Aerosol measuring device PCE-VT 1100-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The Aerosol meter / Aerosol measuring device is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The Aerosol meter / Aerosol measuring device is also frequently used to evaluate the state of small electronic motors. The meter can only be used for real-time measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO-Calibration Certificate
Aerosol meter / Aerosol measuring device PCE-VT 1100S-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The Aerosol meter / Aerosol measuring device is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this Aerosol meter / Aerosol measuring device is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration
  • Portable and battery-operated
  • Needle probe: 45 mm / 1.77 in
  • incl. ISO-Calibration Certificate
Aerosol particle counter PCE-VT 1100-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The aerosol particle counter is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The aerosol particle counter is also frequently used to evaluate the state of small electronic motors. The meter can only be used for real-time measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO-Calibration Certificate
Aerosol particle counter PCE-VT 1100S-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The aerosol particle counter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this aerosol particle counter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration
  • Portable and battery-operated
  • Needle probe: 45 mm / 1.77 in
  • incl. ISO-Calibration Certificate
Cleanroom Particle Counter / Cleanroom Dust Meter PCE-VT 1100-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The Cleanroom Particle Counter / Cleanroom Dust Meter is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The Cleanroom Particle Counter / Cleanroom Dust Meter is also frequently used to evaluate the state of small electronic motors. The meter can only be used for realtime measurement, no memory storage.

  • Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
  • Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
  • Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
  • Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
  • Frequency range: 10 Hz … 1 kHz 
  • Needle probes: 10mm / 0.39" // 45mm / 1.77"
  • incl. ISO-Calibration Certificate
Cleanroom Particle Counter / Cleanroom Dust Meter PCE-VT 1100S-ICA incl. ISO-Calibration Certificate
£ 424.00
Price excl. VAT &. delivery
The Cleanroom Particle Counter / Cleanroom Dust Meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this Cleanroom Particle Counter / Cleanroom Dust Meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration
  • Portable and battery-operated
  • Needle probe: 45 mm / 1.77 in
  • incl. ISO calibration certificate
Condition Monitoring Thermometer PCE-HPT 1
£ 424.00
Price excl. VAT &. delivery

The condition monitoring thermometer is a highly accurate 1-channel temperature measuring device. The condition monitoring thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

  • Measuring range: -100 … +400 °C / -148 … 752 °F
  • Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
  • Resolution: 0.01 °C / 0.018 °F
  • PT-100 sensor

 

Condition Monitoring Vibration Meter PCE-VT 1100-ICA incl. Certificate
£ 424.00
Price excl. VAT &. delivery
The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10mmg
  • incl. ISO Calibration Certificate
Condition Monitoring Vibration Meter PCE-VT 1100S-ICA incl. Certificate
£ 424.00
Price excl. VAT &. delivery
The condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.


  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Portable and battery operated
  • Needle probe: 45mm / 1.77"
  • incl. ISO Calibration Certificate
Contact Thermometer PCE-HPT 1
£ 424.00
Price excl. VAT &. delivery

The contact thermometer is a highly accurate 1-channel temperature measuring device. The contact thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

  • Measuring range: -100 … +400 °C / -148 … 752 °F
  • Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
  • Resolution: 0.01 °C / 0.018 °F
  • PT-100 sensor

Digital Thermometer PCE-HPT 1
£ 424.00
Price excl. VAT &. delivery

The digital thermometer is a highly accurate 1-channel temperature measuring device. The digital thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

  • Measuring range: -100 … +400 °C / -148 … 752 °F
  • Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
  • Resolution: 0.01 °C / 0.018 °F
  • PT-100 sensor