• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

The PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring sensor switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated condition monitoring sensor switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PCE-VA 20-SET is a air humidity meter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This air humidity meter possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the air humidity meter incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3" Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

PCE-VA 20-SET is a climate meter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This climate meter possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the climate meter incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3" Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

The PCE-VA 20-SET is a Condition Monitoring Dew Point Thermometer with flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This Condition Monitoring Dew Point Thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the Condition Monitoring Dew Point Thermometer incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3" Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

PCE-VA 20-SET is a Dew Point Thermometer with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the air flow device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3" Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

PCE-VA 20-SET is a Digital Multimeter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)