Airwheel wind measurer with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

• Output signal: 4 … 20-mA  
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)

The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

• Output signal: 0 … 10V
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)

PCE-VA 20 is a multifunction wind measurer for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

This wind measurer station with outside sensor is a real all-rounder. The wireless wind measurer station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless wind measurer station and outside sensors. The weather data of the wind measurer station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

• 3 displays
• Indoor temperature in Celsius or Fahrenheit
• Outside temperature in Celsius or Fahrenheit
• Indoor air humidity / outdoor air humidity
• Air pressure gauge in inHg or hPa
• Absolute or relative air pressure display selectable
• Precipitation indication in mm or inch
• Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
• Wind speed in mph, km/h, m/s, knots …
• Wind direction indicator
• Wind chill temperature gauge
• Weather forecast, trend indicator, storm warning
• and much more…

The wind measurer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind measurer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement