• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

The HVAC meter is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This HVAC meter inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

The PCE-830-2 HVAC Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This HVAC Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The easy-to-use PCE-PA 8300 HVAC Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

• Voltage measurement range of 10 V … 600 V AC
• Current measurement range of (Set 2) 30 A … 3000 A AC
• Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
• Simultaneous display of harmonics and waveform
• Graphic Phasor diagram
• Captures transients including dip, swell, and outage

The two-way optics is a great advantage of the PCE-VE 1014N-F HVAC meter or inspection camera. There is easy control of the camera head with the HVAC meter. The HVAC meter allows you to capture images and videos, and the videos are also stored with an audio recording. 

• Cable length: 1.5 m / 4.9 ft
• Camera head: 2-way
• Diameter: 4.5 mm / 0.18 in
• Resolution: 640 x 480 Pixel
• Storage of pictures and videos
• 8 GB memory card incl.
• LED lighting

The easy-to-use PCE-PA 8300 HVAC Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

• Voltage measurement range of 10 V … 600 V AC
• Current measurement range of (Set 1) 20 A … 1200 A AC
• Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
• Simultaneous display of harmonics and waveform
• Graphic Phasor diagram
• Captures transients including dip, swell, and outage

Our Relative Humidity Meter is a precise device for determining the moisture and solid materials and is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Relative Humidity Meter enables precise moisture measurement.

• weighing range: 0 ... 220 g
• resolution: 0.001 g
• absolute moisture: 0 ... 100 %
• resolution: 0.01 %
• heating temperature: 40 ... 180 °C
• % moisture
• % dry matter
• % moisture bd
• g residual weight / kg
• residual weight
• data interface: RS232, USB, V24
• GLP data management with Data Bridge
• software (optional)

The 3-Phase-Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase-Power Meter / 3-Phase Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

The PCE-830-2 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

The PCE-830-2 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)