• Measuring range: 0 ... 1.0000 aw
• Resolution: 0.0001 aw
• Accuracy: ±0.015 aw (10 ... 30°C / 50 ... 86°F)
• Adjustable measuring time
• 1 to 4-point calibration
• Memory: 5,030 data records
• Data transfer to PC software

• Measuring range: 0 ... 1.0000 aw
• Resolution: 0.0001 aw
• Accuracy: ±0.015 aw (10 ... 30°C / 50 ... 86°F)
• Adjustable measuring time
• 1 to 4-point calibration
• Memory: 5,030 data records
• Data transfer to PC software

The class 1 data-logging environmental tester meets all requirements for noise measurement and frequency analysis. This integrating precision pulse environmental tester complies with all applicable standards and guidelines.

• Accuracy class 1
• A, B, C & Z frequency weighting
• Fast, Slow, Impulse and Peak time weighting
• Statistics function
• 1/1 octave band included
• 1/3 octave band optional

The portable and easy-to-use roughness tester with an OLED display is particularly suitable for quick and accurate measurements in the workshop or laboratory. The roughness tester uses a DSP chip for control and data processing at high speed and low energy consumption.

• 21 measurement parameters:   Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc,   Rmax, Ry (JIS), Rz (JIS), RP (ASME), Rpm (ASME),   Rv (ASME), R3z, R3zmax, Rz1max, Rmr (c), Rdc, Rmr
• Large graphic OLED display
• Memory: 20 measurement histories with all parameters
• USB interface

The roughness tester PCE-RT 2000BT is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

• Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
• Measurement accuracy: <± 10%
• Micro USB interface
• Bluetooth
• 3 different cut-off wavelengths
• Download free app from the Google Play Store

• Measuring range: 0 ... 1.0000 aw
• Resolution: 0.0001 aw
• Accuracy: ±0.015 aw (10 ... 30°C / 50 ... 86°F)
• Adjustable measuring time
• 1 to 4-point calibration
• Memory: 5,030 data records
• Data transfer to PC software

The portable and easy-to-use material tester with an OLED display is particularly suitable for quick and accurate measurements in the workshop or laboratory. The material tester uses a DSP chip for control and data processing at high speed and low energy consumption.

• 21 measurement parameters:   Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc,   Rmax, Ry (JIS), Rz (JIS), RP (ASME), Rpm (ASME),   Rv (ASME), R3z, R3zmax, Rz1max, Rmr (c), Rdc, Rmr
• Large graphic OLED display
• Memory: 20 measurement histories with all parameters
• USB interface

The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

• Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
• Measurement accuracy: <± 10%
• Micro USB interface
• 3 different cut-off wavelengths
• PC software

The Bluetooth handheld surface - roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface
• Bluetooth
• Download the app for free from the Google Play Store

• Measuring range: 0 ... 1.0000 aw
• Resolution: 0.0001 aw
• Accuracy: ±0.015 aw (10 ... 30°C / 50 ... 86°F)
• Adjustable measuring time
• 1 to 4-point calibration
• Memory: 5,030 data records
• Data transfer to PC software

PCE-HT 225E is a hardness test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

PCE-HT 225E is a material test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

The material surface roughness tester PCE-RT 2000BT is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

• Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
• Measurement accuracy: <± 10%
• Micro USB interface
• Bluetooth
• 3 different cut-off wavelengths
• Download free app from the Google Play Store

The paint viscosity tester has a measuring range of 27…. 5250 cp and an accuracy of +1% of the measuring range. The paint viscosity tester is used, for example, in quality control of production processes. In addition, the paint viscosity tester is particularly used in laboratories of all kinds.

• Measuring range: 27 … 5250 cp
• Rotation speed: 200 RPM
• Volume measuring cup: 600 ml
• Large touch screen for easy operation
• Temperature measuring range: -20 … 250 °C / -4 … 482 °F

The automotive tester PCE-VE 355N3 is a two-way articulating videoscope, inspection camera, industrial endoscope or borescope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.

• 2-way camera probe
• Diameter camera head: Ø 4.5mm / 0.18"
• Interface: Mini-USB 1.1 und AV out/in
• Memory: 8 GB SD memory card (incl.)
• Cable length: 3 m /  9ft 10"

The Bluetooth material surface roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface
• Bluetooth
• Download the app for free from the Google Play Store

• For temperatures up to 1000°C / 1832°F
• Heating chamber made of polycrystalline alumina ceramic
• PID control with ±1°C / 1.8°F accuracy
• Programmable with up to 30 heating sections
• Chamber size: 100 x 100 x 100 mm / 3.9 x 3.9 x 3.9 in

• measurement range: -20 ... 550 °C
• infrared image resolution: 384 x 288 pixels
• frame rate: 25 Hz
• wavelength range: 8 ... 14 µm
• emissivity: 0.01 ... 1