The PCE-P41 power converter is used to convert single-phase power parameters into standard signals. This DIN rail-mountable power converter has a freely programmable analog output, RS485 Modbus interface and memory for up to 9,000 measured values.

• Single-phase power
• Current or voltage output
• Direct and indirect measurement
• Configurable via USB
• RS485 Modbus interface
• Memory for up to 9,000 measured values

The air flow / temperature / humidity data logger determines the wind speed via an impeller with a diameter of 65 mm. The air flow / temperature / humidity data logger can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The climate meter determines the wind speed via an impeller with a diameter of 65 mm. The climate meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The data logger for temperature and humidity determines the wind speed via an impeller with a diameter of 65 mm. The data logger for temperature and humidity can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The data logger with USB interface determines the wind speed via an impeller with a diameter of 65 mm. The data logger with USB interface can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The environmental meter determines the wind speed via an impeller with a diameter of 65 mm. The environmental meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The environmental tester determines the wind speed via an impeller with a diameter of 65 mm. The environmental tester can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The HVAC meter determines the wind speed via an impeller with a diameter of 65 mm. The HVAC meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values