Products for 'débitmètre à ultrasons pce instruments débitmètre à ultrasons pce tds 200 mr'

Ultrasonic testing device PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The Ultrasonic testing device is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the Ultrasonic testing device can be mounted directly on the pipes to be measured without having to cut them open.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% (of the measured value)
Pipe size: DN 25 … 1200 mm
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Flow Tester PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The Clamp-on Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Clamp-on Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Tester / Ultrasonic Testing PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Ultrasonic Tester / Ultrasonic Testing works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Ultrasonic Tester / Ultrasonic Testing is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Ultrasonic HVAC Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 80PVC

£ 1,602.00

Price excl. VAT &. delivery

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 83 and 91 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN80 (83 ... 91 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 80CU

£ 1,602.00

Price excl. VAT &. delivery

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 72 and 80 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN80 (72 ... 80 mm)

Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Ultrasonic Flow Meter PCE-UFM 80PVC

£ 1,602.00

Price excl. VAT &. delivery

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 83 and 91 mm. The Ultrasonic Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN80 (83 ... 91 mm)

Ultrasonic testing device PCE-UFM 80PVC

£ 1,602.00

Price excl. VAT &. delivery

Our Ultrasonic testing device enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 83 and 91 mm. The Ultrasonic testing device of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN80 (83 ... 91 mm)

Ultrasonic Flow Meter PCE-UFM 80CU

£ 1,602.00

Price excl. VAT &. delivery

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 72 and 80 mm. The Ultrasonic Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN80 (72 ... 80 mm)

Ultrasonic testing device PCE-UFM 80CU

£ 1,602.00

Price excl. VAT &. delivery

Our Ultrasonic testing device enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 72 and 80 mm. The Ultrasonic testing device of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN80 (72 ... 80 mm)

Ultrasonic Coating Thickness Gauge for non-metal Substrates PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Coating Thickness Gauge for non-metal Substrates works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Coating Thickness Gauge is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Illuminometer PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The illuminometer is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the illuminometer is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

Photometer PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The photometer is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the photometer is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

Environmental Meter PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The environmental meter is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the environmental meter is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

Lux Meter PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The lux meter is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the lux meter is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

Radiation Detector PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The radiation detector is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the radiation detector is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

Environmental Tester PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The environmental tester is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the environmental tester is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

Light Meter PCE-LMD 200

£ 1,810.00

Price excl. VAT &. delivery

The light meter is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the light meter is extremely versatile.

Measuring range: 0.000 lx … 500 klux
Resolution: 0.001 lx

Precision in accordance with DIN 5032-7
Accuracy class: A
External sensor
8 GB measured value memory

NDT Tester Instruments PCE-2900

£ 1,602.00

Price excl. VAT &. delivery

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle.

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.5%, Repeatability: ± 0.6%
Impactor: Type D
USB and WiFi for data transmission

NDT Test Instruments PCE-VE 355N

£ 1,768.00

Price excl. VAT &. delivery

The NDT test instrument PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.

2-way camera probe
Diameter camera head: Ø 4.5mm / 0.18"
Interface: Mini-USB 1.1 und AV out/in
Memory: 8 GB SD memory card (incl.)
Cable length: 1.5 m / 4ft 11"

Color Test Instrument PCE-CSM 3

£ 1,581.00

Price excl. VAT &. delivery

The color meter PCE-CSM 3 was developed for quality control and offers a very high accuracy reading. When using the color meter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with these color test instruments, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily.

CIE L*a*b*C*h, CIE L*a*b*
Measuring geometry 8°/d
white calibration
Stores 100 reference values and 20,000 samples
measuring aperture is 8 mm
optional liquid sample kit listed under accessories

NDT Test Instruments PCE-VE 1000

£ 1,691.00

Price excl. VAT &. delivery

The NDT test instrument PCE-VE 1000 is an industrial endoscope, borescope, videoscope or inspection camera display featuring an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities.

Stores photos and saves videos with sound to the included 8 GB SD memory card (max. compatibility 32 GB) for quick and easy transfer to a computer
360° image rotation (in 90° steps)
Digital zoom on cameraDisplay only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.

NDT Test Instruments PCE-VE 350HR3

£ 1,691.00

Price excl. VAT &. delivery

PCE-VE 350HR3 is a two-way articulating industrial borescope for engine and turbine inspection, and for the non-destructive inspection (NDI) of other hard-to-reach places. The waterproof camera head of this type of industrial borescope features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

With boost function: better images in dark surroundings
2 additional side LEDs for better lighting
Image rotation possible
Diameter: Ø 6 mm / 0.24"
2-way camera
Memory: 8 GB SD memory card (incl.)
Cable length: 3 m / 9ft 10"

NDT Test Instruments PCE-VE 350HR

£ 1,513.00

Price excl. VAT &. delivery

PCE-VE 350HR is a two-way articulating industrial borescope, engine boresope or borescope camera for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head of this kind of borescope features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

With boost function: better images in dark surroundings
2 additional side LEDs for better lighting
Image rotation possible
Diameter: Ø 6 mm / 0.24"
2-way camera
Memory: 8 GB SD memory card (incl.)
Cable length: 1 m / 3ft 3"

NDT Test Instruments PCE-2900-ICA incl. ISO Calibration Certificate

£ 1,798.00

Price excl. VAT &. delivery

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.5%, Repeatability: ± 0.6%
Impactor: Type D
USB and WiFi for data transmission
Incl. ISO Calibration Certificate

Data Logger / Data Logging Instrument PCE-PA 6500 F50-ICA incl. ISO-Calibration Certificate

£ 1,643.00

Price excl. VAT &. delivery

The Data Logger / Data Logging Instrument measures current and voltage values using the connected current transformers and test leads. From this, the active, apparent and reactive power are determined and transmitted to the measuring platform every second via Wi-Fi. The data is then filed historically on the Data Logger / Data Logging Instrument, processed graphically and can be analysed or exported.

alternating voltage: 40 ... 400 V
alternating current: 2 ... 1250 A
resolution: 0.01 V / 0.01 A
active, apparent and reactive power
electrical energy in Wh
incl. app for Android
8 MB internal memory
magnetic measuring adaptor
incl. ISO-Calibration Certificate

Data Logger / Data Logging Instrument PCE-PA 6500 F150-ICA incl. ISO-Calibration Certificate

£ 1,643.00

Price excl. VAT &. delivery

alternating voltage: 40 ... 400 V
alternating current: 3 ... 4800 A
resolution: 0.01 V / 0.01 A
active, apparent and reactive power
electrical energy in Wh
incl. app for Android
8 MB internal memory
magnetic measuring adaptor
incl. ISO-Calibration Certificate

NDT Test Instruments PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Meter PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Surface Testing PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Surface Testing works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Surface Testing is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Thickness Gauge PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Thickness Gauge works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Thickness Gauge is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Material Thickness Meter PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Material Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software