Query results | PCE Instruments

£ 181.00

Price excl. VAT &. delivery

The panel meter can determine the most important system parameters of a single-phase network. Based on the current and voltage, the panel meter calculates the apparent, active and reactive power, as well as the phase difference angle and the power factor. The panel meter can also determine the average power for a 15 minute period and the average voltage for a 10 minute period.

Input: 0.02…6 A / 0…480 V / 45.00…100.00 Hz
Accuracy: 0.2 %
IP65 protected front
two alarm outputs

Power Meter PCE-N30P

£ 181.00

Price excl. VAT &. delivery

The power meter can determine the most important system parameters of a single-phase network. Based on the current and voltage, the power meter calculates the apparent, active and reactive power, as well as the phase difference angle and the power factor. The power meter can also determine the average power for a 15 minute period and the average voltage for a 10 minute period.

Input: 0.02…6 A / 0…480 V / 45.00…100.00 Hz
Accuracy: 0.2 %
IP65 protected front
two alarm outputs

Air Flow Meter PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Air Flow Meter impresses with its compact design and various output signals. The Air Flow Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Air Flow Meter PCE-WS V

£ 178.00

Price excl. VAT &. delivery

The Air Flow Meter impresses with its compact design and various output signals. The air flow meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

Air Velocity Meter PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Air Velocity Meter impresses with its compact design and various output signals. The Air Velocity Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Air Velocity Meter PCE-WS V

£ 178.00

Price excl. VAT &. delivery

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

Anemometer PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Anemometer PCE-WS V

£ 178.00

Price excl. VAT &. delivery

The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

Clamp Meter PCE-CM 7-ICA incl. ISO-Calibration Certificate

£ 178.00

Price excl. VAT &. delivery

The Clamp Meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp Meter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... +1000 °C
non-contact voltage detection (NCV)
automatic and manual measurement range selection
incl. ISO-Calibration Certificate

Clamp Meter PCE-PCM 1

£ 178.00

Price excl. VAT &. delivery

PCE-PCM 1 is a multipurpose clamp meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
Internal memory: Stores up to 99 measurement values
Includes USB cable and PC software
Three-phase power measurement
True RMS

Clamp on Tester PCE-CM 7-ICA incl. ISO-Calibration Certificate

£ 178.00

Price excl. VAT &. delivery

The Clamp on Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp on Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... +1000 °C
non-contact voltage detection (NCV)
automatic and manual measurement range selection
incl. ISO-Calibration Certificate

Clamp-on Tester PCE-PCM 1

£ 178.00

Price excl. VAT &. delivery

PCE-PCM 1 is a multipurpose clamp-on tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
Internal memory: Stores up to 99 measurement values
Includes USB cable and PC software
Three-phase power measurement
True RMS

Climate Meter PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Climate Meter impresses with its compact design and various output signals. The Climate Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Climate Meter PCE-WS V

£ 178.00

Price excl. VAT &. delivery

The Climate Meter impresses with its compact design and various output signals. The Climate Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

Compressor PCE-ACO 9500

£ 178.00

Price excl. VAT &. delivery

The brushless compressor with a pressure capacity of 9.5 bar is a powerful device that is used to cool compatible endoscope camera tubes. With its high pressure capacity, the brushless compressor is ideal for use with the endoscope to cool the camera tube and clean the viewing area in front of the camera head.

Max. pressure: 9.5 bar
Pressure setting range: 0.3-0.9 MPa
Data output in MPa, bar, PSI.
Flow rate: 125 L/min
Motor power: 1,000 W-Voltage: 110 … 220 VAC
Speed: 2800 rpm
LCD display
Oil-free

Conductivity Meter PCE-PH 30

£ 178.00

Price excl. VAT &. delivery

The conductivity meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable conductivity meter PCE-PH 30 is used to control pH and conductivity.

6 in 1 pH tester
Measuring range: 0 … 2000 μS, 2 … 20 mS
3 point pH calibration
Exchangeable electrodes
Automatic electrode detection

Current Clamp PCE-CM 7-ICA incl. ISO-Calibration Certificate

£ 178.00

Price excl. VAT &. delivery

The Current Clamp is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Current Clamp is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... +1000 °C
non-contact voltage detection (NCV)
automatic and manual measurement range selection
incl. ISO-Calibration Certificate

Current Clamp PCE-PCM 1

£ 178.00

Price excl. VAT &. delivery

PCE-PCM 1 is a multipurpose current clamp or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
Internal memory: Stores up to 99 measurement values
Includes USB cable and PC software
Three-phase power measurement
True RMS

Differential Pressure Meter PCE-PME 250

£ 178.00

Price excl. VAT &. delivery

The digital Differential Pressure Meter is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Differential Pressure Meter is suitable for measuring non-aggressive and non-explosive gases.

measurement range -250 ... +250 Pa (-2.5 ... +2.5 bar)
resolution 0.01 Pa
accuracy: ±1 % FS
MAX, MIN, AVG value, HOLD
audible alarm
13 selectable pressure units
USB-C with data transfer
PC software

Digital Multimeter PCE-CM 7-ICA incl. ISO-Calibration Certificate

£ 178.00

Price excl. VAT &. delivery

The Digital Multimeter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Digital Multimeter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... +1000 °C
non-contact voltage detection (NCV)
automatic and manual measurement range selection
incl. ISO-Calibration Certificate

Digital Multimeter PCE-PCM 1

£ 178.00

Price excl. VAT &. delivery

PCE-PCM 1 is a multipurpose digital multimeter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
Internal memory: Stores up to 99 measurement values
Includes USB cable and PC software
Three-phase power measurement
True RMS

Electrical Tester PCE-PCM 1

£ 178.00

Price excl. VAT &. delivery

PCE-PCM 1 is a multipurpose electrical tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
Internal memory: Stores up to 99 measurement values
Includes USB cable and PC software
Three-phase power measurement
True RMS

Environmental Meter PCE-PH 30

£ 178.00

Price excl. VAT &. delivery

The environmental meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental meter PCE-PH 30 is used to control pH and conductivity.

6 in 1 pH tester
Measuring range: 0 … 2000 μS, 2 … 20 mS
3 point pH calibration
Exchangeable electrodes
Automatic electrode detection

Environmental Meter PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Environmental Meter impresses with its compact design and various output signals. The Environmental Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Environmental Meter PCE-WS V

£ 178.00

Price excl. VAT &. delivery

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

Environmental Tester PCE-PH 30

£ 178.00

Price excl. VAT &. delivery

The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

6 in 1 pH tester
Measuring range: 0 … 2000 μS, 2 … 20 mS
3 point pH calibration
Exchangeable electrodes
Automatic electrode detection

Environmental Tester PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Environmental Tester impresses with its compact design and various output signals. The Environmental Tester can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Environmental Tester PCE-WS V

£ 178.00

Price excl. VAT &. delivery

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

Flow Meter PCE-WS A

£ 178.00

Price excl. VAT &. delivery

The Flow Meter impresses with its compact design and various output signals. The Flow Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 4 … 20 mA (passive)
IP 65 protection
mA, V, pulse or Modbus output

Flow Meter PCE-WS V

£ 178.00

Price excl. VAT &. delivery

The Flow Meter impresses with its compact design and various output signals. The Flow Meter can be used for applications in warning technology, building automation and home technology.

Measuring range: 0.8 m / s … 50 m / s
Measurement from: ≤0.8 m / s
Output: 0 … 10 V
IP 65 protection
mA, V, pulse or Modbus output

HVAC Meter / HVACR Tester PCE-CM 7-ICA incl. ISO-Calibration Certificate

£ 178.00

Price excl. VAT &. delivery

The HVAC Meter / HVACR Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The HVAC Meter / HVACR Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... +1000 °C
non-contact voltage detection (NCV)
automatic and manual measurement range selection
incl. ISO-Calibration Certificate

HVAC Meter / HVACR Tester PCE-PME 250

£ 178.00

Price excl. VAT &. delivery

The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.

measurement range -250 ... +250 Pa (-2.5 ... +2.5 bar)
resolution 0.01 Pa
accuracy: ±1 % FS
MAX, MIN, AVG value, HOLD
audible alarm
13 selectable pressure units
USB-C with data transfer
PC software

HVAC Meter PCE-PCM 1

£ 178.00

Price excl. VAT &. delivery

PCE-PCM 1 is a multipurpose HVAC meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
Internal memory: Stores up to 99 measurement values
Includes USB cable and PC software
Three-phase power measurement
True RMS

Manometer PCE-PME 250

£ 178.00

Price excl. VAT &. delivery

The digital Manometer is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Manometer is suitable for measuring non-aggressive and non-explosive gases.

measurement range -250 ... +250 Pa (-2.5 ... +2.5 bar)
resolution 0.01 Pa
accuracy: ±1 % FS
MAX, MIN, AVG value, HOLD
audible alarm
13 selectable pressure units
USB-C with data transfer
PC software

Panel Meter PCE-N27P

£ 178.00

Price excl. VAT &. delivery

The panel meter measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The panel meter measures all relevant network parameters such as current, voltage, power and frequency. The panel meter is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

Measures up to 63 A directly

Measuring about 1A / 5A transducer possible

Measurement of U, I, f, P

DIN rail

pH Meter PCE-PH 30

£ 178.00

Price excl. VAT &. delivery

The pH meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH meter PCE-PH 30 is used to control pH and conductivity.

6 in 1 pH tester
Measuring range: 0 … 2000 μS, 2 … 20 mS
3 point pH calibration
Exchangeable electrodes
Automatic electrode detection