Skip to main content
Digital Microscope PCE-PBM 100
£ 1,777.00
Price excl. VAT &. delivery
The digital microscope impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and high reliability, the digital microscope is particularly well suited to be used in advanced teaching facilities as well as in laboratories.

  • Eyepieces: WF 10x wide field eyepieces
  • Magnification: 4x, 10x, 40x, 100x
  • 4 lenses up to 100x magnification
  • LC Display 800 x 600 pixels
  • Video output
Inspection Camera PCE-PBM 100
£ 1,777.00
Price excl. VAT &. delivery
The inspection camera impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and high reliability, the inspection camera is particularly well suited to be used in advanced teaching facilities as well as in laboratories.

  • Eyepieces: WF 10x wide field eyepieces
  • Magnification: 4x, 10x, 40x, 100x
  • 4 lenses up to 100x magnification
  • LC Display 800 x 600 pixels
  • Video output
Automotive Tester / Borescope PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The automotive tester PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Car Measuring Device PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The PCE-VE 355N is a two-way articulating car measuring device, inspection camera, industrial endoscope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Condition Monitoring Inspection Camera PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The PCE-VE 355N is a two-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head of the condition monitoring inspection camera features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

 

HVAC Meter PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The HVAC meter PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Industrial Borescope PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The PCE-VE 355N is a two-way articulating industrial borescope, inspection camera, industrial endoscope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Inspection Camera PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The PCE-VE 355N is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

NDT Test Instruments PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The NDT test instrument PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Snake Camera PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The PCE-VE 355N is a two-way articulating snake camera, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Surface Testing - Inspection Camera PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The surface testing PCE-VE 355N is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Videoscope PCE-VE 355N
£ 1,769.00
Price excl. VAT &. delivery

The PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 1.5 m / 4ft 11"

Force Gage PCE-CTT 5
£ 1,767.00
Price excl. VAT &. delivery
The force gage for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gage for drinking bottles.

  • Measuring range: 5 Nm / 3.69 ft-lb
  • Resolution: 0.002 Nm / 0.0015 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer
Force Gauge PCE-CTT 5
£ 1,767.00
Price excl. VAT &. delivery
The Force Gauge for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gauge for drinking bottles.

  • Measuring range: 5 Nm / 3.69 ft-lb
  • Resolution: 0.002 Nm / 0.0015 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer
Material Tester PCE-MOV 60
£ 1,767.00
Price excl. VAT &. delivery
This compact Material Tester is ideal for precise applications in the laboratory and in materials testing. With a maximum temperature of 1000°C / 1832°F and a continuous working temperature of up to 900°C / 1652°C, the Material Tester is ideal for sintering processes, annealing tests or material analyses.

  • For temperatures up to 1000°C / 1832°F
  • Heating chamber made of polycrystalline alumina ceramic
  • PID control with ±1°C / 1.8°F accuracy
  • Programmable with up to 30 heating sections
  • Chamber size: 100 x 100 x 100 mm / 3.9 x 3.9 x 3.9 in
Muffle Furnace PCE-MOV 60
£ 1,767.00
Price excl. VAT &. delivery
This compact Muffle Furnace is ideal for precise applications in the laboratory and in materials testing. With a maximum temperature of 1000°C / 1832°F and a continuous working temperature of up to 900°C / 1652°C, the Muffle Furnace is ideal for sintering processes, annealing tests or material analyses.

  • For temperatures up to 1000°C / 1832°F
  • Heating chamber made of polycrystalline alumina ceramic
  • PID control with ±1°C / 1.8°F accuracy
  • Programmable with up to 30 heating sections
  • Chamber size: 100 x 100 x 100 mm / 3.9 x 3.9 x 3.9 in
Torque Meter PCE-CTT 5
£ 1,767.00
Price excl. VAT &. delivery

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

  • Measuring range: 5 Nm / 3.69 ft-lb
  • Resolution: 0.002 Nm / 0.0015 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer

Universal Testing Machine PCE-MOV 60
£ 1,767.00
Price excl. VAT &. delivery
This compact Universal Testing Machine is ideal for precise applications in the laboratory and in materials testing. With a maximum temperature of 1000°C / 1832°F and a continuous working temperature of up to 900°C / 1652°C, the Universal Testing Machine is ideal for sintering processes, annealing tests or material analyses.

  • For temperatures up to 1000°C / 1832°F
  • Heating chamber made of polycrystalline alumina ceramic
  • PID control with ±1°C / 1.8°F accuracy
  • Programmable with up to 30 heating sections
  • Chamber size: 100 x 100 x 100 mm / 3.9 x 3.9 x 3.9 in
Electrical Tester PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate

Clamp Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Clamp-On Tester PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Current Clamp PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

HVAC Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Portable Power Analyzer PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile Portable Power Analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Power Analyzer PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Power Data Logger PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Power Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Single Phase / 1-Phase Power Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Three-Phase Power Analyzer PCE-360-ICA incl ISO Calibration
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The 3-Phase Power Meter / 3-Phase Power Analyzer is a power meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
ISO Calibration
The Clamp-on Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Clamp-on Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1%  (of the measured value)
  • Pipe size: DN 25 … 1200 mm
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic Flow Tester PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic HVAC Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic testing device PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
ISO Calibration
The Ultrasonic testing device is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the Ultrasonic testing device can be mounted directly on the pipes to be measured without having to cut them open. 

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Force Gage PCE-CTT 2
£ 1,752.00
Price excl. VAT &. delivery
The force gage for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gage for drinking bottles.

  • Measuring range: 2 Nm / 1.5 ft-lb
  • Resolution: 0.001 Nm / 0.00074 ft-lb
  • Accuracy: 0.3% of the measuring range
  • USB interface for software connection
  • Integrated printer