The Bluetooth IoT sensor - roughness tester is used to determine surface roughness. The compact IoT sensor is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The IoT sensor is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.
Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.
The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.
The precision moisture analyzer balance enables moisture determinations with a resolution of 0.001%. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
The precision moisture analyzer balance enables moisture determinations with a resolution of 0.001%. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
The precision moisture meter enables moisture determinations with a resolution of 0.001 %. The operation of this moisture meter is very simple. Set the drying temperature, place the sample and start drying.
The precision moisture meter enables moisture determinations with a resolution of 0.001 %. The operation of this moisture meter is very simple. Set the drying temperature, place the sample and start drying.
The precision moisture meter enables moisture determinations with a resolution of 0.001 %. The operation of the moisture analyzer is very simple. Set the drying temperature, place the sample and start drying.
The Adhesion Tester is a portable, hand-operated device that measures the force required to pull a specific test diameter of coating from a substrate using hydraulic force. The measured force is shown on the LCD and represents the adhesion strength of the coating to the substrate. In addition, the Adhesion Tester offers a USB interface for easy transfer of the measurement data to external devices.
manually controlled hydraulic pump
various measuring head sizes available
memory in CSV file format
incl. 20 mm measuring heads
standard(s): GB/T 5210, ASTM D4541/D7234, ISO 4624/16276-1
The precision moisture meter enables moisture determinations with a resolution of 0.001 %. The operation of the moisture analyzer is very simple. Set the drying temperature, place the sample and start drying.
The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.
The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.
The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tension Dynamometer with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Dynamometer or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tension Load Cell with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Load Cell or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Force Gauge / Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge / Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Force Gauge / Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge / Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Refrigerant Gauges is used to locate leaks on compressed air lines. Furthermore, the Refrigerant Gauges can also be used on coolant lines or gas lines for leak detection.
The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tension Dynamometer / Tension Load Cell with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Dynamometer / Tension Load Cell or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Tension Dynamometer / Tension Load Cell with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Dynamometer / Tension Load Cell or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.
The Anemometer / Anemometers for all applications with data logger can be used for monitoring and alerting the current wind speed. The Anemometer / Anemometers for all applications can be used in various fields of application where a radio version is required.
measurement range up to 180 km/h
input: pulse, analogue (4 ... 20 mA) or radio transmission
The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
The Ultrasonic testing device is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic testing device can also be used on coolant lines or gas lines for leak detection.
The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
Weighing range: 60 g
Readability: 0.1 mg = 0.0001 g / 0.001%.
Drying temperature up to 160°C
Live graph of moisture content
Moisture content %
Dry content %
ATRO %
Weight
Product database for drying parameters
RS232 / USB interface
Storage as TXT file directly on USB stick possible
The moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.
The Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Leak Detector can also be used on coolant lines or gas lines for leak detection.
The Anemometer / Anemometers for all applications with data logger can be used for monitoring and alerting the current wind speed. The Anemometer / Anemometers for all applications can be used in various fields of application where a radio version is required.
measurement range up to 180 km/h
input: pulse, analogue (4 ... 20 mA) or radio transmission
