Query results | PCE Instruments

Clamp-on Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The Clamp-on Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Clamp-on Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% (of the measured value)
Pipe size: DN 25 … 1200 mm
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic Flow Tester PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic HVAC Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Ultrasonic testing device PCE-TDS 75-ICA incl. ISO Calibration Certificate

£ 1,753.00

Price excl. VAT &. delivery

The Ultrasonic testing device is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the Ultrasonic testing device can be mounted directly on the pipes to be measured without having to cut them open.

Measuring range: ± 0.03 … ± 5 m / s
Measuring accuracy: ± 1% of the measured value
Pipe diameter: 25 … 1200 mm (1 … 48 in)
Interface: RS232 & RS485
Relay output
incl. ISO Calibration Certificate

Force Gage PCE-CTT 2

£ 1,752.00

Price excl. VAT &. delivery

The force gage for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gage for drinking bottles.

Measuring range: 2 Nm / 1.5 ft-lb
Resolution: 0.001 Nm / 0.00074 ft-lb
Accuracy: 0.3% of the measuring range
USB interface for software connection
Integrated printer

Force Gauge PCE-CTT 2

£ 1,752.00

Price excl. VAT &. delivery

The force gauge for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gauge for drinking bottles.

Measuring range: 2 Nm / 1.5 ft-lb
Resolution: 0.001 Nm / 0.00074 ft-lb
Accuracy: 0.3% of the measuring range
USB interface for software connection
Integrated printer

Torque Meter PCE-CTT 2

£ 1,752.00

Price excl. VAT &. delivery

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

Measuring range: 2 Nm / 1.5 ft-lb
Resolution: 0.001 Nm / 0.00074 ft-lb
Accuracy: 0.3% of the measuring range
USB interface for software connection
Integrated printer

Gas Detector AQ-500 Set OZU

£ 1,732.00

Price excl. VAT &. delivery

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head OZU included in delivery(Ozone 0-0.15 ppm)
Alarm function
Data logger

Gas Leak Detector AQ-500 Set OZU

£ 1,732.00

Price excl. VAT &. delivery

Gas Leak Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head OZU included in delivery(Ozone 0-0.15 ppm)
Alarm function
Data logger

Ozone Meter AQ-500 Set OZU

£ 1,732.00

Price excl. VAT &. delivery

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

High accuracy and functionality
Interchangeable sensor heads!
Battery operation
Sensor head OZU included in delivery(Ozone 0-0.15 ppm)
Alarm function
Data logger

Viscometer measuring system R1-R5 for RM 100p

£ 1,732.00

Price excl. VAT &. delivery

The paddle measurement system is often used as a standard system in the cosmetics and paint industry. Another field of application is food and beverage production. Even with heterogeneous products that contain solids or lumps in permeated fluids, the measurement system also can be used.

For viscosities of 1 ... 510 000 000 mPa.s

Vibration Meter PCE-VM 20

£ 1,731.00

Price excl. VAT &. delivery

The vibration meter PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
Vibration speed: 0 … 200 mm/s, RMS
Vibration distance: 0 … 2000 μm, peak-peak
Real-time FFT analysis
Direct evaluation according to DIN ISO 10816

Vibration Recorder PCE-VM 20

£ 1,731.00

Price excl. VAT &. delivery

The vibration recorder PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration recorder can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
Vibration speed: 0 … 200 mm/s, RMS
Vibration distance: 0 … 2000 μm, peak-peak
Real-time FFT analysis
Direct evaluation according to DIN ISO 10816

Accelerometer PCE-VM 20

£ 1,731.00

Price excl. VAT &. delivery

The accelerometer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
Vibration speed: 0 … 200 mm/s, RMS
Vibration distance: 0 … 2000 μm, peak-peak
Real-time FFT analysis
Direct evaluation according to DIN ISO 10816

Aerosol meter / Aerosol measuring device PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art Aerosol meter / Aerosol measuring deviceenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the Aerosol meter / Aerosol measuring device is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Aerosol particle counter PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art Aerosol particle counterenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the Aerosol particle counter is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Air Quality Particle Counting PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Air Sampler PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Airborne Particle-Counting Hygiene PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the airborne particle-counting hygiene is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Cleanroom Dust Meter PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art Cleanroom Dust Meter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the Cleanroom Dust Meter is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Data Logger PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the data logger is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Dust Monitor PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the dust monitor is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Force Gage PCE-DFG 20K XF-ICA incl. ISO-Calibration Certificate

£ 1,731.00

Price excl. VAT &. delivery

The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 20 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gage PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

£ 1,731.00

Price excl. VAT &. delivery

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 20K XF-ICA incl. ISO-Calibration Certificate

£ 1,731.00

Price excl. VAT &. delivery

The Force Gauge / Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge / Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 20 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 50K XF-ICA incl. ISO-Calibration Certificate

£ 1,731.00

Price excl. VAT &. delivery

measurement range: 0 ... 50 kN
resolution: 5 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Handheld Surface - Roughness Tester PCE-RT 1200BT

£ 1,731.00

Price excl. VAT &. delivery

The Bluetooth handheld surface - roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Large OLED display
Display for the position of the probe
Micro-USB interface
Bluetooth
Download the app for free from the Google Play Store

IoT Sensor - Roughness Tester PCE-RT 1200BT

£ 1,731.00

Price excl. VAT &. delivery

The Bluetooth IoT sensor - roughness tester is used to determine surface roughness. The compact IoT sensor is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The IoT sensor is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Large OLED display
Display for the position of the probe
Micro-USB interface
Bluetooth
Download the app for free from the Google Play Store

Material Surface Roughness Tester PCE-RT 1200BT

£ 1,731.00

Price excl. VAT &. delivery

The Bluetooth material surface roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Large OLED display
Display for the position of the probe
Micro-USB interface
Bluetooth
Download the app for free from the Google Play Store

Material Surface Roughness Tester PCE-RT 2000

£ 1,731.00

Price excl. VAT &. delivery

The material surface roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
Measurement accuracy: <± 10%
Micro USB interface
3 different cut-off wavelengths
PC software

Measuring device for cleanrooms PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art Measuring device for cleanrooms enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the Measuring device for cleanrooms is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Paint Roughness Tester PCE-RT 1200BT

£ 1,731.00

Price excl. VAT &. delivery

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Large OLED display
Display for the position of the probe
Micro-USB interface
Bluetooth
Download the app for free from the Google Play Store

Paint Roughness Tester PCE-RT 2000

£ 1,731.00

Price excl. VAT &. delivery

The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
Measurement accuracy: <± 10%
Micro USB interface
3 different cut-off wavelengths
PC software

Particle Counter Dust Measuring Device PCE-CPC 50

£ 1,731.00

Price excl. VAT &. delivery

The state-of-the-art particle counter dust measuring device enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the particle counter dust measuring device is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA