£ 170.00
Price excl. VAT &. delivery
The heating mantle PCE-HM 2000 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 2 liters and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 450 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.
The heating mantle PCE-HM 1000 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.
The Easycount-1-CEE-G 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-G energy meter are equipped with male and female connectors.
The Easycount-1-Schuko-G 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-G energy meter are equipped with male and female connectors.
With the moisture meter you can ensure the right climate in your office. The moisture meter measures the CO2 content of the air, the relative humidity and the room temperature. The moisture meter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.
HVAC Meter to test leakage / RMS measurement / continuity and resistance test.
Clamp Meter to test leakage / RMS measurement / continuity and resistance test. With the leakage Clamp Meter it is possible to measure leakage current with a range up to 100 A. The Clamp Meter can measure leakage current while current flows through electrical conductors that are not designed for conduction current. The leakage Clamp Meter is delivered manufacturer calibrated and can additionally be certified to ISO.
The Easycount-1-CEE-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-G energy meter are equipped with male and female connectors.
The Easycount-1-Schuko-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-G energy meter are equipped with male and female connectors.
The PCE-ST 1 HVAC Meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The HVAC Meter is very easy to use, with small dimensions and short response time.
The environmental meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental meter is very easy to use, with small dimensions and short response time.
The PCE-ST 1 temperature meter is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The temperature meter is very easy to use, with small dimensions and short response time.
The PCE-ST 1 Food / Hygiene Temperature Meter is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The food / hygiene temperature meter is very easy to use, with small dimensions and short response time.
Voltmeter to test leakage / RMS measurement / continuity and resistance test.
Clamp on Tester to test leakage / RMS measurement / continuity and resistance test. The Clamp on Tester can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current. The Clamp on Tester, as all test instruments, is delivered manufacturer calibrated, but can additionally be certified to ISO.
Electrical Tester to test leakage / RMS measurement / continuity and resistance test.
The environmental tester is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental tester is very easy to use, with small dimensions and short response time.
Digital Multimeter to test leakage / RMS measurement / continuity and resistance test.
With the Current Clamp it is possible to measure leakage currents up to a range of 100 A. The Current Clamp can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.
The Easycount-1-CEE-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-G energy meter are equipped with male and female connectors.
The Easycount-1-Schuko-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-G energy meter are equipped with male and female connectors.
Multimeter / TRMS Multimeter to test leakage / RMS measurement / continuity and resistance test.
The PCE-ST 1 thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The thermometer is very easy to use, with small dimensions and short response time.
The PCE-ST 1 Contact Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The contact thermometer is very easy to use, with small dimensions and short response time.
The PCE-ST 1 Digital Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The Digital Thermometer is very easy to use, with small dimensions and short response time.
The PCE-ST 1 food thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The thermometer is very easy to use, with small dimensions and short response time.
The PCE-ST 1 Probe Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The probe thermometer is very easy to use, with small dimensions and short response time.
The hygrometer is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the hygrometer. Air humidity and temperature are accurately determined in this compact hygrometer via a semiconductor component. For commissioning, the hygrometer is supplied with a DC voltage. The measured values
are output via a two-wire cable.
The HVACR tester is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the HVACR tester. Air humidity and temperature are accurately determined in this compact HVACR tester via a semiconductor component. For commissioning, the HVACR tester is supplied with a DC voltage. The measured values are output via a two-wire cable.