The RS232 TTL interface converter is a device-independent solution for converting an RS232 signal into a TTL signal. The RS232 TTL interface converter can also be used to convert a TTL signal into an RS 232 signal.

• For parallel and crossed connections
• Transmission speed up to 115,200 baud
• 3.5 mm jack and SUB D 9 interface

The cable fault meter PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the cable fault meter can be used to measure cables that have already been installed and are still to be installed.

• Measuring range cable length: 5 … 3000 m / 16.4 … 9842.5 ft
• Measurement Units: m, ft
• Resolution: 0.1 m / 0.3 ft
• Measuring principle: time domain reflectometer
• 20 pre-set cable types

Clamp Meter to test leakage / RMS measurement / continuity and resistance test. With the leakage Clamp Meter it is possible to measure leakage current with a range up to 100 A. The Clamp Meter can measure leakage current while current flows through electrical conductors that are not designed for conduction current. The leakage Clamp Meter is delivered manufacturer calibrated and can additionally be certified to ISO.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 Ohms
• Test cables are included

Clamp on Tester to test leakage / RMS measurement / continuity and resistance test. The Clamp on Tester can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current. The Clamp on Tester, as all test instruments, is delivered manufacturer calibrated, but can additionally be certified to ISO.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display
• incl. ISO-Calibration Certificate

With the Current Clamp it is possible to measure leakage currents up to a range of 100 A. The Current Clamp can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

Digital Multimeter to test leakage / RMS measurement / continuity and resistance test.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

Electrical Tester to test leakage / RMS measurement / continuity and resistance test.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display
• incl. ISO-Calibration Certificate

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display
• incl. ISO-Calibration Certificate

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display
• incl. ISO-Calibration Certificate

HVAC Meter to test leakage / RMS measurement / continuity and resistance test.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included