The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Measuring tip with handgrip
• Rechargeable battery
• Color graphic display
• incl. ISO Calibration Certificate

The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. ISO Calibration Certificate

The PCE-VE 350HR is a two-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head of the condition monitoring inspection camera features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

• With boost function: better images in dark surroundings
• 2 additional side LEDs for better lighting
• Image rotation possible
• Diameter: Ø 6 mm / 0.24"
• 2-way camera
• Memory: 8 GB SD memory card (incl.)
• Cable length: 1 m / 3ft 3"

The multiway condition monitoring inspection camera with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.

• Multiway 360° rotation head
• Camera diameter: 6 mm / 0.23"
• Cable length: 1 m / 39"
• Camera pixels: 1,000,000
• Depth of field: 7 … 110 mm / 0.27 … 4.33"
• Mini-HDMI interface for image output

The profilometer - roughness tester PCE-RT 1200 is used to determine surface roughness. The compact profilometer is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery

The Handheld Roughness Tester is used to determine surface roughness. The compact surface roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The handheld roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery

The profilometer - roughness tester PCE-RT 1200-ICA is used to determine surface roughness. The compact profilometer is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface
• incl. ISO Calibration Certificate

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

The Handheld Roughness Tester is used to determine surface roughness. The compact surface roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The handheld roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Measuring tip with handgrip
• Rechargeable battery
• Color graphic display
• incl. ISO Calibration Certificate

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

• True RMS measurement for ACA, ACV
• True power: W, KW, MW
• VA, KVA, MVA, VAR, KVAR, MVAR
• PF (power factor), phase angle (Φ)
• KWH, KVAH, KVARH, PFH
• Voltage measurement range: 10 … 600 ACV
• Current measurement range: 0.2 … 1200 ACA
• Real-time current, voltage and power consumption measurement
• Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. ISO Calibration Certificate

The multiway HVAC meter with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.

• Multiway 360° rotation head
• Camera diameter: 6 mm / 0.23"
• Cable length: 1 m / 39"
• Camera pixels: 1,000,000
• Depth of field: 7 … 110 mm / 0.27 … 4.33"
• Mini-HDMI interface for image output

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate