The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first part which has to be replaced.

• Frequency range: 0…120,000 FPM
• Low-wear LED light trigger
• Illumination level 300 x 500 mm
• High intensity of light
• 120 LEDs

The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first part which has to be replaced.

• Frequency range 0…120,000 FPM
• Low-wear LED light trigger
• Illumination level 300 x 500 mm
• High intensity of light
• 120 LEDs

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness colorimeter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered brightness tester or whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

The paint testing equipment is used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered surface testing - brightness / whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered whiteness meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

• measurement range: 0 ... 20 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 20 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 50 kN
• resolution: 5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 50 kN
• resolution: 5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 20 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 50 kN
• resolution: 5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 20 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• measurement range: 0 ... 50 kN
• resolution: 5 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

The Material Hardness Tester for Metal PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N-ICA to determine the surface hardness of many metals. The material tester PCE-2600N-ICA is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED
• Includes ISO calibration certificate

The Material Hardness Tester for Metal PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N-ICA to determine the surface hardness of many metals. The material tester PCE-2600N-ICA is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED
• Includes ISO calibration certificate

The Metal Hardness Testing Durometer PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the durometer PCE-2600N-ICA to determine the surface hardness of many metals. The durometer PCE-2600N-ICA is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED
• Includes ISO calibration certificate

The Portable Metal Hardness Tester PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N-ICA to determine the surface hardness of many metals. The hardness tester PCE-2600N-ICA is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED
• Includes ISO calibration certificate

The Portable Metal Hardness Tester PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N-ICA to determine the surface hardness of many metals. The hardness tester PCE-2600N-ICA is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED
• Includes ISO calibration certificate

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset