The environmental meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental meter PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The environmental tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental tester PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental tester PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

• Measuring range 0 ... 40000 A/cm
• Measurement in A/cm, Gauss or Tesla
• Graphic display of pulse fields
• Touch screen
• Wireless interface for Windows, iOS and Android
• Axial probe

• Turbidity: 0.001 ... 40 / 40 ... 100 NTU
• Resolution: 0.001 / 0.1 NTU
• Accuracy: ±2% of reading / ±5% of reading
• Repeatability: ±2%
• Protection rating IP65
• Power supply: 12V DC
• Suitable for salt water

• Wide measuring range 0 ... 40000 A/cm
• Measurement in A/cm, Gauss or Tesla
• Graphic display of pulse fields
• Touch screen
• Wireless interface for Windows, iOS and Android
• Transversal tongue probe

• Measurement in A/cm, Gauss or Tesla
• Graphical display of pulse fields
• Touch screen
• Wireless interface for Windows, iOS and Android
• Transversal tongue probe

The color meter PCE-CSM 1 was developed for quality control and offers a very high accuracy. When using the color meter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the color meter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference values easily. 6 mm aperture for sample scanning.

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargable Li-ion battery

The environmental meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is a class 2 device and is equipped with an octave band frequency filter. The environmental meter can optionally be upgraded with a 1/3 octave band filter.

• Accuracy class 2
• 1/1 octave band included
• 1/3 octave band optional
• A, B, C & Z frequency weighting
• Fast, Slow, Impulse and Peak time weighting
• Statistics function
• Including class II sound calibrator
• Including calibration certificate for sound calibrator

• Measuring range up to 180 km/h
• Input: Pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analogue output
• Supply voltage: 110 … 230V AC, 50/60 Hz
• Ambient temperature -20 ... 70°C / -4 … 158°F
• Units adjustable: km/h, mph, m/s
• incl. ISO-Calibration Certificate

• Measuring range up to 180 km / h
• Input: pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analog output
• Supply voltage: 24V DC
• Ambient temperature -20 … 70°C / -4 … 158°F
• units adjustable: km / h, mph, m / s
• incl. ISO-Calibration Certificate

PCE-ATP 1 is a IoT sensor, ATP meter, lumitester or luminometer used for surface testing. This IoT sensor allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an IoT sensor that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The radioactivity meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental meter PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

PCE-ATP 1 is an ATP meter, tester, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The Ozone Meter Xgard-1-O3 is a single-gas gas sensor used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The photovoltaic meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Photovoltaic meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferSolar measuring device PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

• Measuring range 0 ... 40000 A/cm
• Measurement in A/cm, Gauss or Tesla
• Graphic display of pulse fields
• Touch screen
• Wireless interface for Windows, iOS and Android
• Axial probe

• Measurement in A/cm, Gauss or Tesla
• Graphical display of pulse fields
• Touch screen
• Wireless interface for Windows, iOS and Android
• Transversal tongue probe

• Wide measuring range 0 ... 40000 A/cm
• Measurement in A/cm, Gauss or Tesla
• Graphic display of pulse fields
• Touch screen
• Wireless interface for Windows, iOS and Android
• Transversal tongue probe

• Turbidity: 0.001 ... 40 / 40 ... 100 NTU
• Resolution: 0.001 / 0.1 NTU
• Accuracy: ±2% of reading / ±5% of reading
• Repeatability: ±2%
• Protection rating IP65
• Power supply: 12V DC
• Suitable for salt water

The environmental tester is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is a class 2 device and is equipped with an octave band frequency filter. The environmental tester can optionally be upgraded with a 1/3 octave band filter.

• Accuracy class 2
• 1/1 octave band included
• 1/3 octave band optional
• A, B, C & Z frequency weighting
• Fast, Slow, Impulse and Peak time weighting
• Statistics function
• Including class II sound calibrator
• Including calibration certificate for sound calibrator

• Measuring range up to 180 km / h
• Input: Pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analogue output
• Supply voltage: 110 … 230V AC, 50/60 Hz
• Ambient temperature -20 ... 70°C / -4 … 158°F
• Units adjustable: km / h, mph, m / s
• incl. ISO-Calibration Certificate

• Measuring range up to 180 km / h
• Input: pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analog output
• Supply voltage: 24 V DC
• Ambient temperature -20 … 70°C / -4 … 158°F
• Units adjustable: km / h, mph, m / s
• incl. ISO-Calibration Certificate

PCE-ATP 1 is a food safety / hygiene - ATP test instrument, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The handheld portable digital colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargeable Li-ion battery

The handheld portable digital Spectrophotometer PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargeable Li-ion battery

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

PCE-ATP 1 is a Hygiene Tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Phosphine, PH₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Phosphine, PH₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference values easily. A 6 mm aperture is used for sample scanning.

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargeable Li-ion battery

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval