The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions: 206 mm x 50 mm x 32 mm

The car measuring device is battery powered and easy to use. This car measuring device can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

The Condition Monitoring Stethoscope is battery powered and easy to use. This Condition Monitoring Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor
• Weight: 240 g, with battery
• Dimensions: 206 x 50 x 32 mm

The PCE-S 41 Vibration Analyser is battery powered and easy to use. This Vibration Analyser can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor, battery, carrying case
• Weight: 240 g, with battery

The PCE-S 41 Vibration Meter is battery powered and easy to use. This Vibration Meter can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

• pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 12 mm
• Temperature range: 0 ... 80 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Soil and mud

• Laboratory pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 4.3 mm
• Temperature range: 0 ... 80 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Suitable for small liquid volumes

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

The earth tester / earth resistance meter is a handy measuring device. Due to the robust and ergonomic design, the user can work comfortably with the earth tester. The earthing resistance can be determined quickly with the earth resistance meter.

• Measuring range: 0 … 2000 Ω
• Measuring principle: Continuity test / earth resistance measurement
• Multi-coloured, backlit LCD
• Installation category III
• 50/60 Hz operating voltage

The heating mantle PCE-HM 100 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 100 ml and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 100 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.

• Power 100 W
• Operating temperature 0 … +450 °C
• Fast heat-up time
• For round flasks up to 100 ml

The heating mantle PCE-HM 250 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.

• Power 150 W
• Operating temperature 0 … +450 °C
• Fast heat-up time
• For round flasks up to 250 ml

The humidity detector is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity detector via the RS485 interface. In this compact humidity detector, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor via the RS485 interface. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software