Products for 'Flow Cup Viscometer PCE 125 Series '

£ 1,162.00

Price excl. VAT &. delivery

The viscometer has a measuring range of 15 … 100,000 cP. With an accuracy of <±2% of the range, the viscometer is a precise measuring device to determine the viscosity of a sample liquid.

Measuring range: 15 … 100,000 cP
Measurement accuracy: <±2% of measuring range
Resolution: 0.01 cP
Spindle set consisting of L1, L2, L3, L4
Temperature measurement
L0 Spindle is used for Viscosity below 15 cP- Temperature measurement

Condition Monitoring Viscometer PCE-RVI 2

£ 1,162.00

Price excl. VAT &. delivery

The condition monitoring viscometer has a measuring range of 15 … 100,000 cP. With an accuracy of <±2% of the range, the condition monitoring viscometer is a precise measuring device to determine the viscosity of a sample liquid.

Measuring range: 15 … 100,000 cP
Measurement accuracy: <±2% of measuring range
Resolution: 0.01 cP
Spindle set consisting of L1, L2, L3, L4
Temperature measurement
L0 Spindle is used for Viscosity below 15 cP- Temperature measurement

Flow Meter PCE-UFM 32PVC

£ 1,148.00

Price excl. VAT &. delivery

Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Flow Meter PCE-UFM 32CU

£ 1,148.00

Price excl. VAT &. delivery

Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Flow Meter PCE-UFM 25PVC

£ 1,050.00

Price excl. VAT &. delivery

Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

Flow Meter PCE-UFM 25CU

£ 1,050.00

Price excl. VAT &. delivery

Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

Ultrasonic Flow Meter PCE-UFM 32PVC

£ 1,148.00

Price excl. VAT &. delivery

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Ultrasonic Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Ultrasonic Flow Meter PCE-UFM 32CU

£ 1,148.00

Price excl. VAT &. delivery

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Ultrasonic Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Ultrasonic Flow Meter PCE-UFM 25PVC

£ 1,050.00

Price excl. VAT &. delivery

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The Ultrasonic Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

Ultrasonic Flow Meter PCE-UFM 25CU

£ 1,050.00

Price excl. VAT &. delivery

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The Ultrasonic Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

Air Flow Meter PCE-WSAC 50W 24

£ 1,065.00

Price excl. VAT &. delivery

The Air Flow Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analog output
Supply voltage: 24V DC
Ambient temperature -20 … 70°C / -4 … 158°F
units adjustable: km / h, mph, m / s

Air Flow Meter PCE-WSAC 50W 230

£ 1,065.00

Price excl. VAT &. delivery

The Air Flow Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: Pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analogue output
Supply voltage: 110 … 230V AC, 50/60 Hz
Ambient temperature -20 .. . 70°C / -4 … 158°F
Units adjustable: km / h, mph, m / s

Viscometer Software for RM 100p

£ 1,013.00

Price excl. VAT &. delivery

Software toanalyze, control and regulatetheonlineviscometerRM100p.In addition to thedisplay of measured valuesas agraphortable,temperature, speedortime-dependence of the online viscometercan be controlledwith the software.

Paint Viscosity Tester PCE-RVI 2

£ 1,162.00

Price excl. VAT &. delivery

The paint viscosity tester has a measuring range of 15 … 100,000 cP. With an accuracy of <±2% of the range, the paint viscosity tester is a precise measuring device to determine the viscosity of a sample liquid.

Measuring range: 15 … 100,000 cP
Measurement accuracy: <±2% of measuring range
Resolution: 0.01 cP
Spindle set consisting of L1, L2, L3, L4
Temperature measurement
L0 Spindle is used for Viscosity below 15 cP- Temperature measurement

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 32CU

£ 1,148.00

Price excl. VAT &. delivery

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 32PVC

£ 1,148.00

Price excl. VAT &. delivery

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 25CU

£ 1,050.00

Price excl. VAT &. delivery

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 25PVC

£ 1,050.00

Price excl. VAT &. delivery

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

HVAC Meter / HVACR Tester PCE-UFM 32CU

£ 1,148.00

Price excl. VAT &. delivery

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

HVAC Meter / HVACR Tester PCE-UFM 32PVC

£ 1,148.00

Price excl. VAT &. delivery

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Anemometer PCE-WSAC 50W 24

£ 1,065.00

Price excl. VAT &. delivery

The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analog output
Supply voltage: 24V DC
Ambient temperature -20 … 70°C / -4 … 158°F
units adjustable: km / h, mph, m / s

HVAC Meter / HVACR Tester PCE-UFM 25CU

£ 1,050.00

Price excl. VAT &. delivery

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

HVAC Meter / HVACR Tester PCE-UFM 25PVC

£ 1,050.00

Price excl. VAT &. delivery

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

Heat Pump Test Equipment PCE-UFM 32CU

£ 1,148.00

Price excl. VAT &. delivery

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Ultrasonic testing device PCE-UFM 32CU

£ 1,148.00

Price excl. VAT &. delivery

Our Ultrasonic testing device enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Ultrasonic testing device of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Ultrasonic testing device PCE-UFM 32PVC

£ 1,148.00

Price excl. VAT &. delivery

Our Ultrasonic testing device enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Ultrasonic testing device of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Air Velocity Meter PCE-WSAC 50W 24

£ 1,065.00

Price excl. VAT &. delivery

The Air Velocity Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air velocity meter means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analog output
Supply voltage: 24V DC
Ambient temperature -20 … 70°C / -4 … 158°F
units adjustable: km / h, mph, m / s

Air Velocity Meter PCE-WSAC 50W 230

£ 1,065.00

Price excl. VAT &. delivery

The Air Velocity Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air velocity meter means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: Pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analogue output
Supply voltage: 110 … 230V AC, 50/60 Hz
Ambient temperature -20 .. . 70°C / -4 … 158°F
Units adjustable: km / h, mph, m / s

Heat Pump Test Equipment PCE-UFM 32PVC

£ 1,148.00

Price excl. VAT &. delivery

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Heat Pump Test Equipment PCE-UFM 25CU

£ 1,050.00

Price excl. VAT &. delivery

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

Ultrasonic testing device PCE-UFM 25CU

£ 1,050.00

Price excl. VAT &. delivery

Our Ultrasonic testing device enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The Ultrasonic testing device of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

Ultrasonic testing device PCE-UFM 25PVC

£ 1,050.00

Price excl. VAT &. delivery

Our Ultrasonic testing device enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The Ultrasonic testing device of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

Heat Pump Test Equipment PCE-UFM 25PVC

£ 1,050.00

Price excl. VAT &. delivery

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

Crane Anemometer PCE-WSAC 50W 230

£ 1,065.00

Price excl. VAT &. delivery

The anemometer PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: Pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analogue output
Supply voltage: 110 … 230V AC, 50/60 Hz
Ambient temperature -20 .. . 70°C / -4 … 158°F
Units adjustable: km / h, mph, m / s

Wind Speed Alarm Controller PCE-WSAC 50W 24

£ 1,065.00

Price excl. VAT &. delivery

The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analog output
Supply voltage: 24V DC
Ambient temperature -20 … 70°C / -4 … 158°F
units adjustable: km / h, mph, m / s

Wind Speed Alarm Controller PCE-WSAC 50W 230

£ 1,065.00

Price excl. VAT &. delivery

The wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

Measuring range up to 180 km / h
Input: Pulse, analogue (4 … 20-mA) or radio transmission
4 … 20-mA analogue output
Supply voltage: 110 … 230V AC, 50/60 Hz
Ambient temperature -20 .. . 70°C / -4 … 158°F
Units adjustable: km / h, mph, m / s