Query results | PCE Instruments

Condition Monitoring Material Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO Calibration Certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a condition monitoring material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring material thickness meter. Wall thicknesses under a coating can also be measured with the condition monitoring material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

IoT Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Magnetic Stirrer PCE-MSR 405

£ 1,047.00

Price excl. VAT &. delivery

The magnetic stirrer is equipped with a heater. Thus, the magnetic stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The magnetic stirrer with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test.

Number of stirring points 5
Max. Stirring quantity: 2000 ml
Adjustable up to 1500 rpm
Maximum 120°C / 248°F

Material Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Material Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Paint Thickness Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Gauge PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic testing device PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic Thickness Gauge PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic Thickness Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Wall Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Calibrated Precision Balance PCE-ABI 120

£ 1,046.00

Price excl. VAT &. delivery

The calibrated precision balance PCE-ABI 120 impresses with a very good price / performance ratio, high measuring accuracy and simple operation. This calibrated class I precision balance has an internal adjustment weight which ensures high measuring accuracy.

Weighing range [max]: 120 g
Readability: 0.1 mg (0.0001 g)
Calibration value: 0.001 g (1 mg)
Weighing plate: Ø 90mm
USB und RS-232 interface
Graphical display
Includes calibration M I

Automotive Tester LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Automotive Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Car Measuring Device LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Car Measuring Device. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Car Measuring Device allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Coating Thickness Gauge LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Coating Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Coating Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Material Tester LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Material Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Material Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Material Thickness Meter LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Material Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Material Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Paint Gauge / Paint Tester LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Paint Gauge / Paint Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Paint Gauge / Paint Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Paint Test Equipment / Paint Testing Equipment LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Paint Test Equipment / Paint Testing Equipment. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Paint Test Equipment / Paint Testing Equipment allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Surface Testing LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Surface Testing. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Surface Testing allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Thickness Gauge LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Thickness Meter LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Electrical Tester 2-Channel PCE-PA 7500

£ 1,033.00

Price excl. VAT &. delivery

The electrical tester is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The electrical tester has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Gas Detector Xgard Type 1 SO2

£ 1,033.00

Price excl. VAT &. delivery

The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO₂, 0 … 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

Stationary
For (Sulfur Dioxide, SO₂, 0 … 10 ppm)
Additional display and alarm station
ATEX or UL approval

Gas Leak Detector Xgard Type 1 SO2

£ 1,033.00

Price excl. VAT &. delivery

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO₂, 0 … 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

Stationary
For (Sulfur Dioxide, SO₂, 0 … 10 ppm)
Additional display and alarm station
ATEX or UL approval

HVAC Meter 2-Channel PCE-PA 7500

£ 1,033.00

Price excl. VAT &. delivery

The HVAC meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Portable Power Analyzer 2-Channel PCE-PA 7500

£ 1,033.00

Price excl. VAT &. delivery

The portable power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Power Analyzer 2-Channel PCE-PA 7500

£ 1,033.00

Price excl. VAT &. delivery

The power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Power Meter 2-Channel PCE-PA 7500

£ 1,033.00

Price excl. VAT &. delivery

The power meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Dynamometer PCE-DFG 5K X

£ 1,032.00

Price excl. VAT &. delivery

The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 5,000 N.

Measuring range: 0 … 5 kN
Resolution: 1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7,200 Hz

Force Gauge PCE-DFG 5K X

£ 1,032.00

Price excl. VAT &. delivery

The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 5,000 N.

Measuring range: 0 … 5 kN
Resolution: 1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7,200 Hz

Digital Universal Indicator PCE-BPD-U-41A

£ 1,025.00

Price excl. VAT &. delivery

The digital universal indicator is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for digital universal indicator is 25 m or 50 m (82 ft or 164 ft).

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Digital Universal Indicator PCE-BPD-U-41D

£ 1,025.00

Price excl. VAT &. delivery

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 11 … 36 V DC

Panel Meter PCE-BPD-U-41A

£ 1,025.00

Price excl. VAT &. delivery

The panel meter is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for panel meter is 25 m or 50 m (82 ft or 164 ft).

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC