Products for 'NDT Tester PCE CT 25 '

£ 1,023.00

Price excl. VAT &. delivery

The environmental tester is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental tester determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Ultrasonic Flow Tester PCE-UFM 25

£ 845.00

Price excl. VAT &. delivery

With our ultrasonic flow tester, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The ultrasonic flow tester is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size:DN25 / 1"
Display Type: OLED
Analog Output: 4 … 20mA

NDT Tester PCE-2000N

£ 863.00

Price excl. VAT &. delivery

The PCE Instruments PCE-2000N NDT tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

Measurement according to Leeb Rebound method
Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
External impact device on 1.5 m / 4.9 ft cable
Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
Storage data measurements on a USB stick
Color display, Measurement in different angles possible, Various other impactors as accessories

NDT Tester PCE-GM 55

£ 890.00

Price excl. VAT &. delivery

The NDT tester PCE-GM 55 is a 3-angle gloss meter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the NDT tester to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

Range : 0 … 200 gloss units / highlights
Accuracy: ± 1 gloss units
Repeatability: ± 0.5 gloss units
Optical angle: 20°, 45°, 75°
For medium and high gloss
Measurements on textiles and paper possible

NDT Tester PCE-2000N-ICA incl. ISO calibration certificate

£ 1,020.00

Price excl. VAT &. delivery

Measurement according to Leeb Rebound method
Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
External impact device on 1.5 m / 4.9 ft cable
Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
Storage data measurements on a USB stick
Color display, Measurement in different angles possible, Various other impactors as accessories
Incl. ISO calibration certificate

NDT Tester PCE-2550-ICA incl. ISO Calibration Certificate

£ 1,015.00

Price excl. VAT &. delivery

Due to its compact design, the PCE-2550-ICA metal hardness tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the metal hardness tester is very versatile.

Measuring ranges: 170 … 960 HLD
Measurement direction: 360°
Impact device: Type D
Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
Internal measurement memory
incl. ISO Calibration Certificate

NDT Tester - Thickness Meter PCE-TG 150A HT

£ 872.00

Price excl. VAT &. delivery

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Air Sampler PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Data Logger PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Environmental Meter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The environmental meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Material Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 919.00

Price excl. VAT &. delivery

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Aerosol meter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The Aerosol meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Automotive Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate

£ 899.00

Price excl. VAT &. delivery

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Material Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate

£ 899.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Dust Monitor PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The dust monitor is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust monitor determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

HVAC Meter PCE-UFM 25

£ 845.00

Price excl. VAT &. delivery

With our fixed installation HVAC meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The fixed installation HVAC meter is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size: DN25 / 1"
Display Type: OLED
Analog Output: 4 … 20mA

Particle Counter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Automotive Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

£ 926.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate

Material Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

£ 926.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Automotive Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 919.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate

NDT Tester - Thickness Meter PCE-TG 150A HT-ICA incl. ISO-calibration certificate

£ 970.00

Price excl. VAT &. delivery

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C
- incl. ISO-calibration certificate

Material Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Automotive Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate

£ 914.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate

Material Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate

£ 914.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Automotive Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Data Logger with USB Interface PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The data logger with USB interface is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger with USB interface determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Temperature Data Logger PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The temperature data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the temperature data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

NDT Test Instruments PCE-1000N

£ 967.00

Price excl. VAT &. delivery

PCE-1000N is a portable handheld Barcol hardness tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.

Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster (HW) Rockwell (HRB / HRE / HRF / HRH)
Measuring range: 0 … 100 HBA / 25 … 150 HB
Accuracy: 81 … 88 HBA: ± 1 HBA / 42 … 48 HBA: ± 2 HBA
Repeatability: 81 … 88 HBA: ± 1.5 HBA / 42 … 48 HBA: ± 2.5 HBA
Resolution: 0.1 HBA
Meets ASTM standards: E140-97; D2583-75; B648-78

Aerosol particle counter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The Aerosol particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Air Quality Meter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The air quality meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air quality meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Data Logger for Temperature and Humidity PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The data logger for temperature and humidity is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger for temperature and humidity determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Dust Measuring Device PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The dust measuring device is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust measuring device determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Vacuum pump PCE-VPP 25

£ 890.00

Price excl. VAT &. delivery

This vacuum pump can generate negative pressure/vacuum and pressures from 16 to 25 bar (depending on the model). An additional pressure gauge is required for reference measurement of the set pressure (optional).

Pressure range: -0.88…25 bar
Accuracy:
Medium: Air pressure

Surface Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 919.00

Price excl. VAT &. delivery

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

£ 926.00

Price excl. VAT &. delivery

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 919.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate