Query results | PCE Instruments

£ 1,023.00

Price excl. VAT &. delivery

The Aerosol meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Aerosol particle counter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The Aerosol particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Air Humidity Meter PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The air humidity meter is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This air humidity meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Air Quality Meter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The air quality meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air quality meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Air Sampler PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Climate Meter PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The climate meter is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This climate meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Coating Thickness Gauge PCE-CT 80HP-F5N3-ICA incl. ISO-Calibration Certificate

£ 1,023.00

Price excl. VAT &. delivery

The paint gauge can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the paint gauge covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(1.5 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Condition Monitoring Sound Level Meter (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The Condition Monitoring Sound Level Meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the Condition Monitoring Sound Level Meter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Condition Monitoring Stroboscope PCE-LES 400

£ 1,023.00

Price excl. VAT &. delivery

A Condition Monitoring Stroboscope is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Condition Monitoring Stroboscope can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input

Data Logger for Temperature and Humidity PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The data logger for temperature and humidity is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger for temperature and humidity determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Data Logger PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Data Logger with USB Interface (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The data logger with USB interface (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the data logger with USB interface is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Data Logger with USB Interface PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The data logger with USB interface is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger with USB interface determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Data Logging Sound Level Meter (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The data logging sound level meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the data logging sound level meter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Decibel Meter (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The decibel meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the decibel meter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Dew Point Data Logger PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The dew point data logger is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This dew point data logger measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Dew Point Thermometer for Compressed Air PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The dew point thermometer for compressed air PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This dew point thermometer for compressed air measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Dust Measuring Device PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The dust measuring device is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust measuring device determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Dust Monitor PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The dust monitor is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust monitor determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Earth Tester PCE-ITE 50

£ 1,023.00

Price excl. VAT &. delivery

The PCE-ITE 50 is a robust earth tester with a large 3.5" TFT color LCD display. The earth tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

Electrical Tester PCE-ITE 50

£ 1,023.00

Price excl. VAT &. delivery

The PCE-ITE 50 is a robust Electrical Tester with a large 3.5" TFT color LCD display. The Electrical Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

Environmental Meter (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The environmental meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the environmental meter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Environmental Meter PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The environmental meter PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This environmental meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Environmental Meter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The environmental meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Environmental Tester (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The environmental tester (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the environmental tester is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Environmental Tester PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The environmental tester PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This environmental tester measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Environmental Tester PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The environmental tester is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental tester determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Humidity Detector PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The humidity detector PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This humidity detector measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

HVAC Meter PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The HVAC meter PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This HVAC meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Hygrometer PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The hygrometer PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This hygrometer measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Insulation Tester PCE-ITE 50

£ 1,023.00

Price excl. VAT &. delivery

The PCE-ITE 50 is a robust insulation tester with a large 3.5" TFT color LCD display. The insulation tester PCE-ITE 50 also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

IoT Sensor PCE-ITE 50

£ 1,023.00

Price excl. VAT &. delivery

The PCE-ITE 50 is a robust IoT sensor with a large 3.5" TFT color LCD display. The IoT sensor also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

Moisture Meter PCE-DPM 3

£ 1,023.00

Price excl. VAT &. delivery

The moisture meter PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This moisture meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Noise Dose Meter (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The noise dose meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the sound dosimeter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Noise Meter / Sound Meter (Badge Type) PCE-MND 10

£ 1,023.00

Price excl. VAT &. delivery

The noise meter / sound meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the noise meter / sound meter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Particle Counter PCE-MPC 25

£ 1,023.00

Price excl. VAT &. delivery

The particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs