Skip to main content
Insulation Meter PCE-IT414
£ 985.00
Price excl. VAT &. delivery

Insulation Meter for high tension up to 10,000 volts.


  • For professionals
  • 6 digit LCD
  • Measurements according to VDE 0413 part 1
  • Test tension up to 10,000V

Temperature Indicator PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The temperature indicator is a measuring device for stationary measurement of relative humidity and temperature. This temperature indicator consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Isolation Meter PCE-IT414
£ 985.00
Price excl. VAT &. delivery
The Isolation Meter belong to a series of highly accurate resistance devices that have a 6 digit display. These Isolation Meters have been developed specifically for technical service and for difficult measurement conditions.

  • For professionals
  • 6 digit LCD
  • Measurements according to VDE 0413 part 1
  • Test tension up to 10,000V

PAT Tester PCE-IT414
£ 985.00
Price excl. VAT &. delivery
The PAT Tester belong to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

  • For professionals
  • 6 digit LCD
  • Measurements according to VDE 0413 part 1
  • Test tension up to 10,000V

Climate Meter PCE-G1
£ 979.00
Price excl. VAT &. delivery

The climate meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This climate meter consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Environmental Meter PCE-G1
£ 979.00
Price excl. VAT &. delivery

The environmental meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This environmental meter consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Temperature Meter PCE-G1
£ 979.00
Price excl. VAT &. delivery

The temperature meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This temperature meter consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Thermometer PCE-G1
£ 979.00
Price excl. VAT &. delivery

The thermometer is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This thermometer consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Environmental Meter PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The environmental meter is a measuring device for stationary measurement of relative humidity and temperature. This environmental meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Humidity Detector PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The humidity detector is a measuring device for stationary measurement of relative humidity and temperature. This humidity detector consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Temperature Meter PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The temperature meter is a measuring device for stationary measurement of relative humidity and temperature. This temperature meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Thermometer PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The thermometer is a measuring device for stationary measurement of relative humidity and temperature. This thermometer consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Panel Meter PCE-G1
£ 979.00
Price excl. VAT &. delivery
The panel meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This panel meter consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
Large Display PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The large display is a measuring device for stationary measurement of relative humidity and temperature. This large display consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Environmental Tester PCE-G1
£ 979.00
Price excl. VAT &. delivery

The environmental tester is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This environmental tester consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Humidity Detector PCE-G1
£ 979.00
Price excl. VAT &. delivery

The humidity detector is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This humidity detector consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

HVAC Meter PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The hvac meter is a measuring device for stationary measurement of relative humidity and temperature. This hvac meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Hygrometer PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The metric thermo hygrometer is a measuring device for stationary measurement of relative humidity and temperature. This metric thermo hygrometer consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Climate Meter PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The climate meter is a measuring device for stationary measurement of relative humidity and temperature. This climate meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

Panel Meter PCE-G1A
£ 984.00
Price excl. VAT &. delivery
The Panel meter is a measuring device for stationary measurement of relative humidity and temperature. This panel meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA
Large Display PCE-G1
£ 979.00
Price excl. VAT &. delivery

The large display is intended for stationary measurement of relative humidity and temperature and direct display on a large screen. This large display consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Environmental Tester PCE-G1A
£ 984.00
Price excl. VAT &. delivery

The environmental tester is a measuring device for stationary measurement of relative humidity and temperature. This environmental tester consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)
  • Voltage supply: 230 V AC
  • with analogue output 4 … 20 mA

HVAC Meter PCE-G1
£ 979.00
Price excl. VAT &. delivery

The HVAC meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This HVAC meter consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Material Tester PCE-1000N
£ 967.00
Price excl. VAT &. delivery

PCE-1000N is a portable handheld Material Tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.


  • Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster  (HW)  Rockwell (HRB / HRE / HRF / HRH)
  • Measuring range: 0 … 100 HBA / 25 … 150 HB
  • Accuracy: 81 … 88 HBA: ± 1 HBA / 42 … 48 HBA: ± 2 HBA
  • Repeatability: 81 … 88 HBA: ± 1.5 HBA / 42 … 48 HBA: ± 2.5 HBA
  • Resolution: 0.1 HBA
  • Meets ASTM standards: E140-97; D2583-75; B648-78

Hygrometer PCE-G1
£ 979.00
Price excl. VAT &. delivery

The hygrometer is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This hygrometer consists of an LED display (100 mm high) and is protected according to IP 54.

  • Temperature measuring range: 0 … +60 °C (Celsius only)
  • Humidity measuring range: 10 … 95 % RH
  • Up to 50 m (164 ft) reading distance
  • External sensor (wired)

Environmental Meter PCE-WM1
£ 914.00
Price excl. VAT &. delivery

PCE-WM1 is a multi-function environmental meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


  • Temperature range: -20 … 80°C 
  • Relative humidity range: 10 … 95% RH
  • Absolute humidity range: 0.5 … 74.4 g/m³

HVAC Meter PCE-WM1
£ 914.00
Price excl. VAT &. delivery

PCE-WM1 is a multi-function HVAC meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


  • Temperature range: -20 … 80°C 
  • Relative humidity range: 10 … 95% RH
  • Absolute humidity range: 0.5 … 74.4 g/m³

Accelerometer PCE-VT 3750
£ 934.00
Price excl. VAT &. delivery
The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
  • Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
  • Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
  • Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
  • Automatic ISO 10816-3 evaluation
  • Colored graphic display
  • incl. headset
Accelerometer PCE-VT 3800S
£ 953.00
Price excl. VAT &. delivery

The accelerometer is the ideal companion for checking vibrating parts, machines and systems. With the external vibration sensor on the accelerometer, the vibration displacement up to 3.9 mm, the vibration velocity up to 399.9 mm/s and the vibration acceleration up to 399.9 m/s² can be determined.

Measuring ranges

  • Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
  • Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
  • Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
  • Automatic ISO 10816-3 evaluation
  • Data logger: 50 memory locations with 43200 measured values each
  • Rechargeable battery
  • Color graphic display
  • Measuring tip with handgrip

Calibrator PCE-VPP 25
£ 890.00
Price excl. VAT &. delivery
This Calibrator can generate negative pressure/vacuum and pressures from 16 to 25 bar (depending on the model). An additional pressure gauge is required for reference measurement of the set pressure of the Calibrator (optional).

  • Pressure range: -0.88…25 bar
  • Accuracy:
  • Medium: Air pressure
Weighbridge PCE-RS 2000
£ 890.00
Price excl. VAT &. delivery

The weighbridge PCE-RS 2000 is designed for stationary use. The robust construction makes this weighbridge particularly well suited for weighing large objects. The weighbridge is made of painted steel.


  • Weighing capacity: 2000 kg
  • Resolution: 0.5 kg
  • Bidirectional RS-232 interface
  • Analog output 4 … 20 mA optional 

Accelerometer PCE-VM 3D
£ 890.00
Price excl. VAT &. delivery

The Accelerometer provides quick and simple measurements of acceleration and displacement to check the acceleration of machines and construction parts, allowing for defects and larger unbalances to be determined. The Accelerometer is able to record vibration in three axis: on the x-, y-, and z- axes. The large display of the Accelerometer allows capturing momentary values as well as recording a whole vibration spectrum.


  • Vibration acceleration: 0.1 m/s² … 400.0 m/s² (Peak); (0 … 40 g force)
  • Vibration velocity: 0.01 … 400.0 mm/s
  • Vibration amplitude: 0.001 mm … 4.000 mm (Peak-Peak)

Hygrometer Set PCE-HT110-5
£ 1,001.00
Price excl. VAT &. delivery

The PCE-HT110 Hygrometer or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


  • Measurement ranges: 0 … 50°C / 32 … 122°F, 10 … 90% RH
  • Resolution: 0.1°C / 0.18°F, 0.1% RH
  • Data format: .XLS (compatible with Microsoft Excel)
  • Set = Quantity of 5 x units

Hardness Tester PCE-2000N
£ 864.00
Price excl. VAT &. delivery
The PCE Instruments PCE-2000N hardness tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
Material Tester PCE-2000N
£ 864.00
Price excl. VAT &. delivery
The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
NDT Tester PCE-2000N
£ 864.00
Price excl. VAT &. delivery
The PCE Instruments PCE-2000N NDT tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories