Products for 'Sensor de respuesto ESS PCE GA 12 '

£ 4,619.00

Price excl. VAT &. delivery

The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Gas Detector PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The gas detector PCE-RCM 12 is used for indicative testing of environmental parameters. The gas detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the gas detector provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Gas Detector PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas detector.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Gas Leak Detector PCE-LDC 20

£ 4,619.00

Price excl. VAT &. delivery

The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments

Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Gas Detector PCE-LDC 15

£ 3,426.00

Price excl. VAT &. delivery

The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

Working frequency: 40 kHz (± 2 kHz)
Operating time: >10 hours
Various attachments
Color display: 3.5" touch panel TFT
Soundproof headphones

Gas Leak Detector PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The gas leak detector PCE-RCM 12 is used for indicative testing of environmental parameters. The gas leak detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the gas leak detector provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Gas Leak Detector PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The gas leak detector PCE-GA 12 is a very easy-to-use measuring device. This gas leak detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas leak detector.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Gas Leak Detector PCE-LDC 15

£ 3,426.00

Price excl. VAT &. delivery

The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

Working frequency: 40 kHz (± 2 kHz)
Operating time: >10 hours
Various attachments
Color display: 3.5" touch panel TFT
Soundproof headphones

Gas Detector Gas-Pro-3

£ 1,890.00

Price excl. VAT &. delivery

This gas detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / CO2 / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. Please email jmu@pce- instruments.com (UK) or rhe@pce-instruments.com (US) for details

HVAC Meter PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The HVAC meter PCE-GA 12 is a very easy-to-use measuring device. This HVAC meter detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the HVAC meter.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Leak Detector PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The leak detector PCE-GA 12 is a very easy-to-use measuring device. This leak detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the leak detector.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Leak Detector PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Environmental Meter PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The environmental meter PCE-GA 12 is a very easy-to-use measuring device. This environmental meter detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental meter.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Environmental Tester PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The environmental tester PCE-GA 12 is a very easy-to-use measuring device. This environmental tester detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental tester.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Refrigerant Gauges PCE-GA 12

£ 199.00

Price excl. VAT &. delivery

The Refrigerant Gauges PCE-GA 12 is a very easy-to-use measuring device. This Refrigerant Gauges detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the Refrigerant Gauges.

Measuring range up to 10000 ppm
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
For the detection of combustible gases

Gas Leak Detector Gas-Pro-3

£ 1,890.00

Price excl. VAT &. delivery

This Gas Leak Detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / CO2 / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. Please email jmu@pce- instruments.com (UK) or rhe@pce-instruments.com (US) for details

Gas Detector Gas-Pro-2

£ 1,692.00

Price excl. VAT &. delivery

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

Gas Leak Detector Gas-Pro-2

£ 1,692.00

Price excl. VAT &. delivery

This Gas Leak Detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

Condition Monitoring Gas Leak Detector PCE-LDC 20

£ 4,619.00

Price excl. VAT &. delivery

The condition monitoring gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant and gas systems
Leakage assessment
Various attachments
Wireless headphones
Frequency: 38 . .. 42 kHz
Measurement rate: 1 Hz
Memory capacity: 1 GB

Gas Leak Detector PCE-LDC 8

£ 1,451.00

Price excl. VAT &. delivery

The Gas Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Gas Leak Detector can also be used on coolant lines or gas lines for leak detection.

Measuring principle: ultrasound
Measuring principle: air, coolant, non-explosive gases
Working frequency of 40 kHz
up to 6 h battery operation
Leak detection via headphones and LCD display
Localize leaks up to 18m, 59 ft.

Condition Monitoring Gas Leak Detector PCE-LDC 15

£ 3,426.00

Price excl. VAT &. delivery

The condition monitoring gas leak detector is used in various areas of industry. For example, the condition monitoring gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

Working frequency: 40 kHz (± 2 kHz)
Operating time: >10 hours
Various attachments
Color display: 3.5" touch panel TFT
Soundproof headphones

Gas Detector Gas-Pro-1

£ 1,112.00

Price excl. VAT &. delivery

This gas detector Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the gas detector Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

IoT Meter / IoT Sensor PCE-CSM 20-ICA incl. ISO-Calibration Certificate

£ 5,062.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld IoT Meter / IoT Sensor used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the IoT Meter / IoT Sensor offers a long battery life, a 4-color lamp and an easy-to-use portable design. The IoT Meter / IoT Sensor covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

Gas Detector / Gas Detection Instrument PCE-GA 25

£ 427.00

Price excl. VAT &. delivery

The Gas Detector / Gas Detection Instrument enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Gas Detector / Gas Detection Instrument detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

Flammable gases: 0 ... 100 %LEL
O2: 0 ... 30% vol
CO: 0 ... 1000 ppm
H2S: 0 ... 100 ppm
Accuracy: ±5% F.S.
LCD display with status indicator
Visual, audible and vibration alarm
Data memory for alarm events
Operating modes: measurement, self-test, calibration
Li-ion battery for up to 8 hours of operation
Protection class: IP66

Thermometer PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The thermometer PCE-RCM 12 is used for indicative testing of environmental parameters. The thermometer PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the thermometer provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Gas Leak Detector Gas-Pro-1

£ 1,112.00

Price excl. VAT &. delivery

This Gas Leak Detector Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

Gas Leak Detector PCE-GA 25

£ 427.00

Price excl. VAT &. delivery

The Gas Leak Detector enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Gas Leak Detector detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

Flammable gases: 0 ... 100 %LEL
O2: 0 ... 30% vol
CO: 0 ... 1000 ppm
H2S: 0 ... 100 ppm
Accuracy: ±5% F.S.
LCD display with status indicator
Visual, audible and vibration alarm
Data memory for alarm events
Operating modes: measurement, self-test, calibration
Li-ion battery for up to 8 hours of operation
Protection class: IP66

CO2 Analyser Gas-Pro-3

£ 1,890.00

Price excl. VAT &. delivery

This CO2 Analyser Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the CO2 Analyser Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / CO2 / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. Please email jmu@pce- instruments.com (UK) or rhe@pce-instruments.com (US) for details

Humidity Detector PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The humidity detector PCE-RCM 12 is used for indicative testing of environmental parameters. The humidity detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the humidity detector provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Air Sampler PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The air sampler PCE-RCM 12 is used for indicative testing of environmental parameters. The air sampler PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air sampler provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Carbon Dioxide Meter Gas-Pro-3

£ 1,890.00

Price excl. VAT &. delivery

This Carbon Dioxide Meter Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Carbon Dioxide Meter Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / CO2 / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. Please email jmu@pce- instruments.com (UK) or rhe@pce-instruments.com (US) for details

CO2 Analyser Gas-Pro-2

£ 1,692.00

Price excl. VAT &. delivery

This CO2 Analyser Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the CO2 Analyser Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

Air Quality Meter Gas-Pro-3

£ 1,890.00

Price excl. VAT &. delivery

This Air Quality Meter Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Air Quality Meter Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

Purpose: Personal protection
Sensor type: CO / CO2 / H2S / O2 / CH4
Memory: Yes
Interface: USB
Includes suction pump
Other gas sensors available upon request. Please email jmu@pce- instruments.com (UK) or rhe@pce-instruments.com (US) for details

CO2 Analyser PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The CO2 Analyzer PCE-RCM 12 is used for indicative testing of environmental parameters. The CO2 Analyzer PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the CO2 Analyzer provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Environmental Meter PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The environmental meter PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental meter provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements

Environmental Tester PCE-RCM 12

£ 427.00

Price excl. VAT &. delivery

The environmental tester PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental tester PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about these parameters.

Fine dust, CO2, formaldehyde, humidity, temperature
Particle size channels: PM 2.5 / PM 10
Temperature measuring range: -20 … 70°C / -4 … 158°F

Humidity measuring range: 0 … 100% r.H.
Formaldehyde measuring range: 0.00 … 5.00 mg/m³
CO2 measuring range: 0 … 9999 ppm

For indicative measurements