PCE-1000N is a portable handheld Material Tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.

• Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster  (HW)  Rockwell (HRB / HRE / HRF / HRH)
• Measuring range: 0 … 100 HBA / 25 … 150 HB
• Accuracy: 81 … 88 HBA: ± 1 HBA / 42 … 48 HBA: ± 2 HBA
• Repeatability: 81 … 88 HBA: ± 1.5 HBA / 42 … 48 HBA: ± 2.5 HBA
• Resolution: 0.1 HBA
• Meets ASTM standards: E140-97; D2583-75; B648-78

The PCE-TG 300-NO2 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO7 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

The PCE-TG 300-NO2 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO7 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

The PCE-TG 300-NO5 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

The PCE-TG 300-NO5 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

Due to its compact design, the PCE-2550-ICA material tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester is very versatile.

• Measuring ranges: 170 … 960 HLD
• Measurement direction: 360°
• Impact device: Type D
• Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
• Internal measurement memory
• incl. ISO Calibration Certificate

The PCE-TG 300-NO5/90 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

The Leeb Material Hardness Tester for Metal PCE-900-ICA measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Material Hardness Tester for Metal measures the metal hardness in 6 different hardness scales. 

• Measurement according to Leeb Rebound method
• Testing of HRC, HRB, HV, HB, HSD
• Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
• Accuracy: 0.80% / Repeatability: 1.10%
• Incl. type D Leeb probe
• Optional Software Available
• incl. ISO Calibration Certificate

The PCE-TG 300-NO5/90 is a condition monitoring material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring material thickness meter. Wall thicknesses under a coating can also be measured with the condition monitoring material thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth