Skip to main content
Environmental Tester PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Environmental Tester is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Environmental Tester has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Environmental Tester PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The environmental tester is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this environmental tester it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Environmental Tester PCE-A 430
£ 67.00
Price excl. VAT &. delivery
The environmental tester enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The environmental tester is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Formaldehyde Meter / Formaldehyde Tester PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Formaldehyde Meter / Formaldehyde Tester is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Formaldehyde Meter / Formaldehyde Tester has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Environmental Tester PCE-PMI 5
£ 61.00
Price excl. VAT &. delivery
The Environmental Tester enables non-destructive determination of the moisture content in building materials. The Environmental Tester measures reliably in concrete, wood, walls, and other materials.
- Resolution: 0.1 digits

  • Measuring range: 0 ... 100 digits
  • Adjustable limit values for RISK/WET
  • Measuring depth: 20 ... 40 mm / 0.8 ... 1.6 in
  • Illuminated display
Environmental Tester PCE-PH 14
£ 62.00
Price excl. VAT &. delivery
Our Environmental Tester is a precise measuring device for pH and temperature values, equipped with an interchangeable electrode that is automatically temperature-compensated. This guarantees accurate measurement results. The Environmental Tester offers a hold function to record current measured values, as well as a temperature display in °C and °F.

  • pH measurement range: 0 ... 14 pH
  • resolution: 0.01 pH
  • accuracy: 0.05 pH
  • temperature: 0 ... 60 °C / 32 ... 140 °F
  • resolution: 0.1 °C / 0.1 °F
  • accuracy: 1 °C / 0.1 °F
  • automatic calibration
  • for aqueous, non-corrosive media
Automotive Tester PCE-T 230
£ 62.00
Price excl. VAT &. delivery
Our Automotive Tester with a measurement range of 0.5 ... 19999 rpm and a resolution of 0.1 rpm enables accurate and reliable measurements in many applications. With a sampling rate of 0.8 seconds, the Automotive Tester delivers quick results.

  • rotational speed: 0.5 ... 19999 rpm
  • resolution: 0.1 rpm
  • accuracy: 0.05 % of Rd + 1 digit
  • units: rpm, m/min, ft/min
  • functions MAX, MIN, LAST, AVG
  • incl. measuring adaptor
pH Tester PCE-PH 14
£ 62.00
Price excl. VAT &. delivery
Our pH Tester is a precise measuring device for pH and temperature values, equipped with an interchangeable electrode that is automatically temperature-compensated. This guarantees accurate measurement results. The pH Tester offers a hold function to record current measured values, as well as a temperature display in °C and °F.

  • pH measurement range: 0 ... 14 pH
  • resolution: 0.01 pH
  • accuracy: 0.05 pH
  • temperature: 0 ... 60 °C / 32 ... 140 °F
  • resolution: 0.1 °C / 0.1 °F
  • accuracy: 1 °C / 0.1 °F
  • automatic calibration
  • for aqueous, non-corrosive media
Clamp on Tester PCE-CM 6
£ 62.00
Price excl. VAT &. delivery
The Clamp on Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp on Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Environmental Tester PCE-PHM 12
£ 62.00
Price excl. VAT &. delivery
The aquarium environmental tester PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium environmental tester can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium environmental tester is not only used for temperature indication but also for temperature compensation.

  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Accuracy: ± 0.1 pH
  • Temperature compensation up to 50°C / 122°F
  • Universal mounting bracket
Automotive Tester / Refractometer PCE-SG Antifreeze
£ 62.00
Price excl. VAT &. delivery
No-Shopping

PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.


Measurement ranges:

  • 50 … 0 °C for coolant or antifreeze1.15 … 1.30 sg for battery acid
  • 40 … 0 °C for cleaner

HVAC Meter / HVACR Tester PCE-CM 6
£ 62.00
Price excl. VAT &. delivery
The HVAC Meter / HVACR Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The HVAC Meter / HVACR Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Electrical Tester PCE-LT 15
£ 62.00
Price excl. VAT &. delivery
The electrical tester PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a electrical tester at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
  • AC voltage: 750V
  • DC voltage: 1000V
  • Resistance: 4 MΩ
  • Continuity test: 400 Ω
  • Electrical safety: CAT III 600V
Surface Testing PCE-SRM 10
£ 67.00
Price excl. VAT &. delivery
The Surface Testing is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. Thanks to its compact design and ease of use, the Surface Testing is ideal for both mobile applications and stationary measurements.

  • Surface resistance: 10³ Ω ... 10¹⁰ Ω
  • Accuracy: 1 decade
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Accuracy: ±2°C / ±3.6°F
  • Hold function
pH Meter PCE-PHM 12
£ 62.00
Price excl. VAT &. delivery
The aquarium pH meter PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium pH meter can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium pH meter is not only used for temperature indication but also for temperature compensation.

  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Accuracy: ± 0.1 pH
  • Temperature compensation up to 50°C / 122°F
  • Universal mounting bracket
Magnetometer PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The magnetometer is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this magnetometer  it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Environmental Meter PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The environmental meter is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this environmental meter it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Radiation Detector PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The radiation detector is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this radiation detector it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Radioactivity Meter PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The electrosmog meter is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this radiation meter it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Voltmeter PCE-LT 15
£ 62.00
Price excl. VAT &. delivery
The voltmeter PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a voltmeter at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
  • AC voltage: 750V
  • DC voltage: 1000V
  • Resistance: 4 MΩ
  • Continuity test: 400 Ω
  • Electrical safety: CAT III 600V
HVAC Meter PCE-A 430
£ 67.00
Price excl. VAT &. delivery
The HVAC meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The HVAC meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Gauss Meter PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The gauss meter is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this radiation meter it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Digital Multimeter PCE-LT 15
£ 62.00
Price excl. VAT &. delivery
The digital multimeter PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a digital multimeter at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
  • AC voltage: 750V
  • DC voltage: 1000V
  • Resistance: 4 MΩ
  • Continuity test: 400 Ω
  • Electrical safety: CAT III 600V
Electromagnetic Field Meter PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The electromagnetic field meter is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this electromagnetic field meter it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
EMF measuring device PCE-EMF 30
£ 62.00
Price excl. VAT &. delivery
The EMF measuring device is a multifunctional 3-in-1 meter for electric fields (EF), magnetic fields (MF) and radio frequency fields (RF). With this EMF measuring device it is possible to measure magnetic fields up to 999.9 mG directly.

  • Measuring ranges: 0.01 … 1800 mW/m², 1 … 1999V/m, 0.1 … 999.9 mG
  • Bandwidth: 1MHz … 10GHz, 5Hz … 3500MHz
  • Units: mW/m², V/m, mG, µT
  • Acoustic alarm
Environmental Meter PCE-PHM 12
£ 62.00
Price excl. VAT &. delivery
The environmental meter PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium environmental meter can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium environmental meter is not only used for temperature indication but also for temperature compensation.

  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Accuracy: ± 0.1 pH
  • Temperature compensation up to 50°C / 122°F
  • Universal mounting bracket
Water Analysis Meter PCE-PHM 12
£ 62.00
Price excl. VAT &. delivery
The aquarium water analysis meter PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium water analysis meter can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium water analysis meter is not only used for temperature indication but also for temperature compensation.

  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Accuracy: ± 0.1 pH
  • Temperature compensation up to 50°C / 122°F
  • Universal mounting bracket
Thermometer PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Thermometer is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Thermometer has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Handheld Refractometer PCE-SG Antifreeze
£ 62.00
Price excl. VAT &. delivery
No-Shopping

PCE-SG is a handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.


  • Measuring ranges: Ethylene glycol: -50 … 0 °C
  • Resolution: Ethylene glycol: 5 °C
  • Accuracy: Ethylene glycol: ± 5 °C

Environmental Meter PCE-A 430
£ 67.00
Price excl. VAT &. delivery
The environmental meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The environmental meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Environmental Meter PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Environmental Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Environmental Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Temperature Meter PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Temperature Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Temperature Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Gas Leak Detector PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Gas Leak Detector is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Gas Leak Detector has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Air Quality Meter PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Air Quality Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Air Quality Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Gas Detector / Gas Detection Instrument PCE-VOC 5
£ 67.00
Price excl. VAT &. delivery
The Gas Detector / Gas Detection Instrument is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Gas Detector / Gas Detection Instrument has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Concrete Moisture Meter PCE-PMI 5
£ 61.00
Price excl. VAT &. delivery
The Concrete Moisture Meter enables non-destructive determination of the moisture content in building materials. The Concrete Moisture Meter measures reliably in concrete, wood, walls, and other materials.
- Resolution: 0.1 digits

  • Measuring range: 0 ... 100 digits
  • Adjustable limit values for RISK/WET
  • Measuring depth: 20 ... 40 mm / 0.8 ... 1.6 in
  • Illuminated display