• Measuring range: -200 ... 1800°C / -328 ... 3272°F
• High accuracy: ± (0.04 % v.Mw. + 0.3 K) for type K
• Thermocouple types: K, J, S, R, E, T, N, B
• Memory for 10 million measured values
• Alarm limits adjustable
• 12 input channels
• PC software

• measurement range: -20 ... 550 °C
• infrared image resolution: 384 x 288 pixels
• frame rate: 25 Hz
• wavelength range: 8 ... 14 µm
• emissivity: 0.01 ... 1

• Measuring range: -200 ... 1800°C / -328 ... 3272°F
• High accuracy: ± (0.04 % v.Mw. + 0.3 K) for type K
• Thermocouple types: K, J, S, R, E, T, N, B
• Memory for 10 million measured values
• Alarm limits adjustable
• 12 input channels
• PC software

PCE-T 1200 is a 12-channel datalogging temperature meter that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

• 12-channel data logger for temperature (°C / °F)
• Works with type K, J, T, E, R and S thermocouple sensors
• Adjustable datalogging interval from 1 … 3600 seconds per channel
• Includes 2 Type K sensors 1-meter in length

The temperature meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This temperature meter consists of an LED display (100 mm high) and is protected according to IP 54.

• Temperature measuring range: 0 … +60 °C (Celsius only)
• Humidity measuring range: 10 … 95 % RH
• Up to 50 m (164 ft) reading distance
• External sensor (wired)

The temperature meter is a measuring device for stationary measurement of relative humidity and temperature. This temperature meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

• Temperature measuring range: 0 … +60 °C (Celsius only)
• Humidity measuring range: 10 … 95 % RH
• Up to 50 m (164 ft) reading distance
• External sensor (wired)
• Voltage supply: 230 V AC
• with analogue output 4 … 20 mA

• Measuring range: -200 ... 1800°C / -328 ... 3272°F
• High accuracy: ± (0.04 % v.Mw. + 0.3 K) for type K
• Thermocouple types: K, J, S, R, E, T, N, B
• Memory for 10 million measured values
• Alarm limits adjustable
• 12 input channels
• PC software

PCE-WM1 is a multi-function temperature meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.

• Temperature range: -20 … 80°C 
• Relative humidity range: 10 … 95% RH
• Absolute humidity range: 0.5 … 74.4 g/m³

This 12-channel temperature data logger accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel. 

• 12-channel data logger for temperature (°C / °F)
• Works with type K, J, T, E, R and S thermocouple sensors
• Adjustable datalogging interval from 1 … 3600 seconds per channel
• Includes 2 Type K sensors 1-meter in length

The temperature meter has two measuring inputs. Each measuring input from the temperature meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature meter shows rapid temperature fluctuations.

• Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
• Resolution: 0.01 °C
• Two-channel temperature data logger
• For thermocouples type K, T and J
• Data storage for 20,000 measuring points

The PCE-HT110 Temperature Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

• Measurement ranges: 0 … 50°C / 32 … 122°F, 10 … 90% RH
• Resolution: 0.1°C / 0.18°F, 0.1% RH
• Data format: .XLS (compatible with Microsoft Excel)
• Set = Quantity of 5 x units

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

• Diameter: Ø2.2mm / 0.08"
• Cable length: 1m / 3.2 ft
• Camera direction: 90°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission