Products for 'pce-ct 80hp' | PCE Instruments

£ 885.00

Price excl. VAT &. delivery

The material thickness meter can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the material thickness meter covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Coating Thickness Gauge PCE-CT 80HP-FN2

£ 869.00

Price excl. VAT &. delivery

The car measuring device can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the car measuring device covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Coating Thickness Gauge PCE-CT 80HP-FN0D5

£ 885.00

Price excl. VAT &. delivery

The material tester can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the material tester covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 0.5 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Coating Thickness Gauge PCE-CT 80HP-F5N3

£ 890.00

Price excl. VAT &. delivery

The paint gauge can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the paint gauge covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(1.5 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Coating Thickness Gauge PCE-CT 80HP-FN2D5

£ 881.00

Price excl. VAT &. delivery

The coating thickness gauge can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the coating thickness gauge covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Coating Thickness Gauge PCE-CT 80HP-FN1D5

£ 861.00

Price excl. VAT &. delivery

The automotive tester can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the automotive tester covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Coating Thickness Gauge PCE-CT 80HP-FN3-ICA incl. ISO-Calibration Certificate

£ 1,015.00

Price excl. VAT &. delivery

The material thickness meter can reliably determine the thickness High Accuracy

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80HP-F5N3-ICA incl. ISO-Calibration Certificate

£ 1,023.00

Price excl. VAT &. delivery

The paint gauge can reliably determine the thickness High Accuracy

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(1.5 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80HP-FN2-ICA incl. ISO-Calibration Certificate

£ 998.00

Price excl. VAT &. delivery

The car measuring device can reliably determine the thickness High Accuracy

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80HP-FN0D5-ICA incl. ISO-Calibration Certificate

£ 1,015.00

Price excl. VAT &. delivery

The material tester can reliably determine the thickness High Accuracy

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 0.5 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80HP-FN2D5-ICA incl. ISO-Calibration Certificate

£ 1,012.00

Price excl. VAT &. delivery

The coating thickness gauge can reliably determine the thickness High Accuracy

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80HP-FN1D5-ICA incl. ISO-Calibration Certificate

£ 990.00

Price excl. VAT &. delivery

The automotive tester can reliably determine the thickness of High Accuracy

, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the automotive tester covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Thickness Meter PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Automotive Tester PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Thickness Gauge PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness gauge are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Material Tester PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Material Tester works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Tester is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Thickness Meter PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Surface Tester PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

IoT Sensor PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Surface Testing PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Surface Testing works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Surface Testing is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Thickness Gauge PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Thickness Gauge works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Thickness Gauge is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

NDT Test Instruments PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Paint Thickness Tester PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

NDT Tester - Surface Tester PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The NDT tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Material Thickness Meter PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Material Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Coating Thickness Gauge PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)

Car Measuring Device PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Material Thickness Meter PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Ultrasonic Tester / Ultrasonic Testing PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Ultrasonic Tester / Ultrasonic Testing works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Ultrasonic Tester / Ultrasonic Testing is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Paint Thickness Gauge PCE-CT 100N

£ 1,446.00

Price excl. VAT &. delivery

The paint thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the paint thickness gauge are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Paint Gauge / Paint Tester PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Paint Gauge / Paint Tester works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Paint Gauge / Paint Tester is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

IoT Sensor PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software