The sound sensor is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The sound sensor is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

• Measuring range: 30 … 130 dB in 3 ranges
• Resolution: 0.1 dB
• Accuracy: ±1.5 dB
• Class 2 and frequency weighting: A
• Output: 4 … 20-mA and alarm relay output of 5 A / up to 240V AC
• IP 54 ingress protection rating on transmitter
• Includes digital indicator with IP 65 rating

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

The pressure gauge PCE-P50-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The pressure meter PCE-P50-ICA with highest accuracy and best performance. With this pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The differential pressure meter PCE-P50-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
• Resolution: 500 Pa / 0.0725 psi / 0.005 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate

PCE-917 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 700 kPa / ± 101.5 psi / ± 7 bar
• Resolution: 500 Pa / 0.0725 psi / 0.005 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate