The Three-Phase Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three-Phase Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. 

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 3-Phase Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter / 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

• PCE-830 + PCE-3007 flexible amp clamp (3000A)
• Electrical conductor pick-up: 170 mm / 6.7 in diameter
• Minimum radial curve: 35 mm / 1.4 in
• Length of electrical conductor: 610 mm / 24 in
• Sampling rate: 2 sec.
• Memory size: 512 kB / max. 52,420 data (1 phase)
• Incl. ISO calibration certificate

• Voltage: 1 ... 1000V AC/DC
• Resolution: 0.1V
• Current: 0.5 ... 6000 A AC/DC
• Resolution: 0.1 A
• Accuracy: ±0.5% v.Mw.
• IEC 61000-4-30 Class A
• Frequency: 42.5 ... 460 Hz
• Power and energy
• Phase angle
• Harmonics
• Oscilloscope function
• Inrush current
• Efficiency measurement of inverters
• Mains signal monitoring
• Wifi
• Logger function and memory
• 7.8-inch touch display

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

The PCE-830-3 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 HVAC Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This HVAC Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

The PCE-830-3 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This Current Clamp also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-3007 flexible amp clamp (3000 A)
• Electrical conductor pick-up: 170 mm / 6.69 in diameter
• Length of electrical conductor: 610 mm / 24.0 in
• Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values - single phase)

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

• Relative moisture: 0 ... 99.9%
• Anhydrite screed: 0 ... 3.5%
• Cement screed: 0 ... 4.9%
• Concrete: 0 ... 6%
• Gypsum screed: 0 ... 10%
• Hardwood: 0 ... 37%
• Softwood: 0 ... 51%
• Resolution: 0.1%
• Repeatability: ±0.5%
• Ambient temperature: 0 ... 65°C / 32 ... 149°F
• Humidity: 0 ... 100% RH
• Dew point measurement
• 2.8" TFT color display
• Internal memory: 32 GB
• USB-C interface
• Data logger function
• Statistics and hold mode

The colorimeter PCE-CSM 3 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

• CIE L*a*b*C*h, CIE L*a*b*
• Measuring geometry 8°/d
• White calibration standard included
• Stores 100 reference values and 20,000 samples
• Measuring aperture is 8 mm
• optional liquid sample kit listed under accessories

The Spectrophotometer PCE-CSM 3 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

• CIE L*a*b*C*h, CIE L*a*b*
• Measuring geometry 8°/d
• White calibration standard included
• Stores 100 reference values and 20,000 samples
• Measuring aperture is 8 mm
• optional liquid sample kit listed under accessories