Products for 'Accelerometro PCE WVS 50 ICA Rapporto di taratura ISO incluso '

Condition Monitoring PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Condition Monitoring also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Decibel Meter PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Decibel Meter is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Decibel Meter also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Environmental Meter PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Environmental Meter is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Environmental Meter also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Health & Safety PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Health & Safety is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Health & Safety also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Environmental Tester PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Environmental Tester is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Environmental Tester also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Noise Meter / Sound Meter PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Noise Meter / Sound Meter is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Noise Meter / Sound Meter also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Density Meter PCE-SCD 50

£ 10,573.00

Price excl. VAT &. delivery

The Density Meter is a modern measuring instrument that enables precise analyses of wet and dry density, degree of compaction and moisture content in soil. Equipped with an integrated GPS, the Density Meter provides precise location data for every measurement.

wet and dry density, % compaction, % moisture
measuring depth: 50 ... 300 mm
measurement within 5 seconds
internal data memory for 4200 values
status bar for GPS signal, memory and battery
5-inch touch screen
location determination via GPS
software
standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

Data Logger / Data Logging Instrument PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Data Logger / Data Logging Instrument is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Data Logger / Data Logging Instrument also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Noise Dose Meter / Sound Dose Meter PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Noise Dose Meter / Sound Dose Meter is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Noise Dose Meter / Sound Dose Meter also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Sound Level Meter / Noise Level Meter PCE-SLM 50-ICA incl. ISO-Calibration Certificate

£ 2,306.00

Price excl. VAT &. delivery

The Sound Level Meter / Noise Level Meter is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Sound Level Meter / Noise Level Meter also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

Measuring range: 21 ... 143 dBA
Resolution: 0.1 dB
Class 1 accuracy IEC61672-1:2013
Frequency range: 10 Hz ... 20 kHz
Frequency weighting: A, C, Z
Time weighting: S, F, I
Ethernet, WiFi, USB Type-C
Internal memory: 8 GB
External SD card support: 32 GB / 64 GB
Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
4-inch TFT touch display
PC software
incl. ISO-Calibration Certificate

Building Moisture Meter / Building Material Moisture Meter PCE-SCD 50

£ 10,573.00

Price excl. VAT &. delivery

The Building Moisture Meter / Building Material Moisture Meter is a modern measuring instrument that enables precise analyses of wet and dry density, degree of compaction and moisture content in soil. Equipped with an integrated GPS, the Building Moisture Meter / Building Material Moisture Meter provides precise location data for every measurement.

wet and dry density, % compaction, % moisture
measuring depth: 50 ... 300 mm
measurement within 5 seconds
internal data memory for 4200 values
status bar for GPS signal, memory and battery
5-inch touch screen
location determination via GPS
software
standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

Clamp Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Clamp on Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Digital Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Power Analyzer PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Power Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Voltmeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Current Clamp PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 Current Clamp is used to measure the current of 1- or 3-phase loads. This Current Clamp is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Current Clamp.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Force Gauge PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The PCE-DDM 50 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

HVAC Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 HVAC meter is used to measure the current of 1- or 3-phase loads. This HVAC meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the HVAC meter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Weighing Hook PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The PCE-DDM 50 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

Hanging Scales PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The PCE-DDM 50 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

Crane Scale PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The PCE-DDM 50 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

Suspended Scale PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The suspended scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The suspended scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

Measurement range: 50,000 kg / 500 kN / 110,231 lbs
Resolution: 20 kg / 200 N
Units of measurement: kg / t / lbs / N / kN
Supplied with remote control indicator

Spectrophotometer PCE-CSM 10-ICA incl. ISO-Calibration Certificate

£ 5,963.00

Price excl. VAT &. delivery

The Spectrophotometer PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10nm wavelength increments with Reflectance Curve graph.

CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining
Measuring geometry 10° or 2°/d
Black and white calibration
Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
1000 Standards, 15,000 sample memory
incl. ISO-Calibration Certificate

Colorimeter PCE-CSM 10-ICA incl. ISO-Calibration Certificate

£ 5,963.00

Price excl. VAT &. delivery

The Colorimeter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10nm wavelength increments with Reflectance Curve graph.

CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining
Measuring geometry 10° or 2°/d
Black and white calibration
Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
1000 Standards, 15,000 sample memory
incl. ISO-Calibration Certificate

Spectrophotometer PCE-CSM 20-ICA incl. ISO-Calibration Certificate

£ 5,062.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld Spectrophotometer used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the Spectrophotometer offers a long battery life, a 4-color lamp and an easy-to-use portable design. The Spectrophotometer covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

Colorimeter PCE-CSM 20-ICA incl. ISO-Calibration Certificate

£ 5,062.00

Price excl. VAT &. delivery

PCE-CSM 20 is a handheld Colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the Colorimeter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The Colorimeter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

Force Gage PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

Measurement range: 50,000 kg / 500 kN / 110,231 lb
Resolution: 20 kg / 200 N / 44 lb
Minimum load: 400 kg / 881 lb
Supplied with remote control indicator

Tension Dynamometer PCE-DDM 50

£ 4,227.00

Price excl. VAT &. delivery

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

Measurement range: 50,000 kg / 500 kN / 110,231 lb
Resolution: 20 kg / 200 N / 44 lb
Minimum load: 400 kg / 881 lb
Supplied with remote control indicator

Multimeter / TRMS Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 Multimeter / TRMS Multimeter is used to measure the current of 1- or 3-phase loads. This Multimeter / TRMS Multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Multimeter / TRMS Multimeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Portable Power Analyzer PCE-GPA 50-ICA incl. ISO Calibration Certificate

£ 863.00

Price excl. VAT &. delivery

The PCE-GPA 50 Portable Power Analyzer is used to measure the current of 1- or 3-phase loads. This Portable Power Analyzer is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Portable Power Analyzer.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Handheld Tachometer PCE-LES 500-ICA incl. ISO-Calibration Certificate

£ 4,530.00

Price excl. VAT &. delivery

Our Stroboscope / Stroboscope Light is the ideal solution for mobile applications. With its large measuring range of 50 to 50,000 FPM, it is versatile and offers precise measurements for a wide range of applications. Thanks to its compact size and low weight, it is extremely handy and can be taken anywhere. Equipped with 28 energy-saving and long-lasting LEDs as a light source, the Stroboscope / Stroboscope Light guarantees reliable performance and a long service life.

Measuring range: 50 ... 50000 FPM
Resolution: 0.1 FPM
Accuracy: ±0.01%
External trigger input
Light source: 28 LEDs
Phase shift: 0 ... 359 °
Flash duration: 8 ... 100 µs
Measurement on coils and flat sheets
incl. ISO-Calibration Certificate

Tachometer PCE-LES 500-ICA incl. ISO-Calibration Certificate

£ 4,530.00

Price excl. VAT &. delivery

Measuring range: 50 ... 50000 FPM
Resolution: 0.1 FPM
Accuracy: ±0.01%
External trigger input
Light source: 28 LEDs
Phase shift: 0 ... 359 °
Flash duration: 8 ... 100 µs
Measurement on coils and flat sheets
incl. ISO-Calibration Certificate

Spectrophotometer PCE-CSM 8-ICA incl. ISO-Calibration Certificate

£ 4,779.00

Price excl. VAT &. delivery

The Spectrophotometer and spectrophotometer PCE-CSM 8 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. When using the Spectrophotometer, you can choose between different color spaces (CIE LAB, XYZ, Yxy, LCh, and LUV) and 13 illuminants. The reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily to determine delta pass/fail. 58 mm sphere with wavelength from 400 to 700 nm in 10 nm increments.

CIE LAB, XYZ, Yxy, LCh, and LUV
13 illuminants to choose, white and black calibration
1000 alphanumeric reference values and up to 10,000 sample values memory
WI, YI, TI, Mt, Color Stain, Color Fastness, SCI and SCE option (specular included and excluded)
Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
incl. ISO-Calibration Certificate