• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"

The accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

• Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
• Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
• Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
• Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
• Frequency range: 10 Hz … 1 kHz 
• Needle probes: 10mm / 0.39" // 45mm / 1.77"

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"
• incl. ISO Calibration Certificate

The accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

• Vibration Acceleration: 0.01 … 199.9 m/s2 (peak value)
• Vibration Speed: 0.01 … 199.9 mm/s (effective)- Vibration Displacement:  0.001 … 1.999 mm (peak-peak)
• Accuracy: ±5%, ±2 Digits (20 Hz … 1 KHz) / ±10%, ±2 Digits (10 Hz … 20 Hz)
• Frequency: Accel. and Vel. 10 Hz … 1 kHz, Displacement 10 Hz … 500 Hz 
• Frequency range: 10 Hz … 1 kHz 
• Needle probes: 10mm / 0.39" // 45mm / 1.77"
• incl. ISO Calibration Certificate

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mm
• incl. ISO Calibration Certificate

 The vibration analyzer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration analyzer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"
• incl. ISO Calibration Certificate

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mmg
• incl. ISO Calibration Certificate

The HVAC meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this HVAC meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"
• incl. ISO Calibration Certificate

The HVAC Meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC Meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mm
• incl. ISO Calibration Certificate

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mm

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"

The HVAC Meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC Meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10mm

The vibration test instrument is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration test instrument, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm
• incl. ISO Calibration Certificate

The vibration test instrument is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration test instrument, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units
• Holds the reading after each measurement
• Portable and battery operated
• Needle probe: 45mm / 1.77"

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

This vertical force test stand is a motorized test station with a force range of up to 500 N. In addition to setting the speed, the vertical force test stand also offers the option of switching between automatic and manual mode.

• Force range: 500 N / 50 kg / 110 lb
• Distance display resolution: 0.02 mm
• Resolution: 1 mm/min
• Tensile and compression testing
• Travel: 270 mm / 10.6"
• 220V AC ONLY

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Measuring tip with handgrip
• Rechargeable battery
• Color graphic display

The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display
• incl. headset

The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Measuring tip with handgrip
• Rechargeable battery
• Color graphic display