The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement

The Air Flow Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.

• Measuring range up to 180 km / h
• Input: pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analog output
• Supply voltage: 24V DC
• Ambient temperature -20 … 70°C / -4 … 158°F
• units adjustable: km / h, mph, m / s

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

The air flow meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The air flow meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The Air Flow Meter PCE-WSAC 50-111 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 4 … 20 mA
• Communication: RS485
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate