• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 110 ... 230 V AC , 50 / 60 Hz
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 24 V DC
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

The PCE-VA 20-SET is a multi-functional wind measurer including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate

The Wind Measurer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the Wind Measurer means stormy gusts can also be monitored.

• Measuring range up to 180 km / h
• Input: pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analog output
• Supply voltage: 24V DC
• Ambient temperature -20 … 70°C / -4 … 158°F
• units adjustable: km / h, mph, m / s

PCE-VA 20-SET is a multifunction wind measurer with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the wind measuring device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

• Wind Measurer, adjustable alarms
• supply voltage: 230 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• Wind Measurer, adjustable alarms
• supply voltage: 24 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas